Turbo to Oil Return Line gasket
09-17-2006, 06:41 PM
#1
Senior Member
Thread Starter
Join Date: May 2005
Location: San Francisco
Posts: 547
Total Cats: 0
Turbo to Oil Return Line gasket
Does anyone know where I can get one? or a P/N?
conversely, does anyone know of what gasket material would hold up to the high temps the turbo puts out?
conversely, does anyone know of what gasket material would hold up to the high temps the turbo puts out?
Reply
0
0
09-17-2006, 11:57 PM
#2
Senior Member
iTrader: (1)
Join Date: Mar 2006
Location: Tucson "it's 110º" Arizona
Posts: 1,017
Total Cats: 0
I've used this as a "turbo to drain-line gasket." You want to be cautious however, as getting a little extra in the drain line could be detrimental.
"For 4-cylinder, turbocharged or high performance engines. The most advanced, high temperature RTV silicone gasket available. Sensor-safe, low odor, noncorrosive. Superior adhesion. Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets. Temperature range -75°F to 700°F intermittent; resists auto and shop fluids and vibration."
"For 4-cylinder, turbocharged or high performance engines. The most advanced, high temperature RTV silicone gasket available. Sensor-safe, low odor, noncorrosive. Superior adhesion. Three times more oil resistant than conventional silicones; eight times more flexible than cut gaskets. Temperature range -75°F to 700°F intermittent; resists auto and shop fluids and vibration."
Last edited by UofACATS; 09-18-2006 at 12:01 AM. Reason: added "quote"
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
