tried tightening rx7 afm
#1
Senior Member
Thread Starter
iTrader: (8)
Join Date: Aug 2006
Location: Springfield, IL
Posts: 1,012
Total Cats: 0
tried tightening rx7 afm
so i tried to tune the rx7 afm and when i turned it clockwise it made it run leaner unlike the diagram shows i turned it about 10 clicks? is that to much to make it run lean??
#5
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
with 1.8L injectors you should still be able to get a perfect idle.
you can try drilling out the cap on the outside, uncovering the idle-mixture screw. Then back this out a tiny bit until you see 14.7:1.
I never had any trouble getting 305s or 265cc injectors to idle at 14.7:1 with just little adjustments to the flapper tension....
up top, the AFM isn't going to change your mixture.
you can try drilling out the cap on the outside, uncovering the idle-mixture screw. Then back this out a tiny bit until you see 14.7:1.
I never had any trouble getting 305s or 265cc injectors to idle at 14.7:1 with just little adjustments to the flapper tension....
up top, the AFM isn't going to change your mixture.
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM