Post your wheel alignments
#1
Post your wheel alignments
Hey guys,
Just out of curiosity I wouldn't mind seeing what everyone else is running there alignments at for there track only cars. Copy and paste below with ur specs:
Camber front:
Camber rear:
Toe front:
Toe rear:
Caster:
Suspension (ie coilovers):
Tires and size:
Any other info is great like aero, approx power etc.
Post me up
Just out of curiosity I wouldn't mind seeing what everyone else is running there alignments at for there track only cars. Copy and paste below with ur specs:
Camber front:
Camber rear:
Toe front:
Toe rear:
Caster:
Suspension (ie coilovers):
Tires and size:
Any other info is great like aero, approx power etc.
Post me up
#3
Camber front: -2.0
Camber rear: -1.8
Toe front: 0
Toe rear: 0
Caster: Not 100% sure off the top of my head but it is maxed out ~5-6
Suspension (ie coilovers): Bilstiens with GC sleeves 550/350 at 12.5" F / 12.75" R
Tires and size: Hankook RS3s 225/45-15
No aero. Stock '99 motor.
Works really well IMO for the price. The 0 toe is great for wear, especially after you get the tires heat cycled.
Camber rear: -1.8
Toe front: 0
Toe rear: 0
Caster: Not 100% sure off the top of my head but it is maxed out ~5-6
Suspension (ie coilovers): Bilstiens with GC sleeves 550/350 at 12.5" F / 12.75" R
Tires and size: Hankook RS3s 225/45-15
No aero. Stock '99 motor.
Works really well IMO for the price. The 0 toe is great for wear, especially after you get the tires heat cycled.
#8
Camber front : 2.9
Camber rear : 2.4
Toe both : 0
Caster : can't remember
Car weighs approx 2400lbs with driver. Racing beat tubular race front sway bar, and some unknown red rear sway bar on full soft(assuming it's the 5/8" Racing Beat solid rear). 750/450 spring rates. The car is mostly neutral with this setup.
Thread
Thread Starter
Forum
Replies
Last Post