mr2daj

iTrader: (-1)

I like the fact i can pull as much g on throttle as i can on the brakes lol

Surge is definitely an issue and like you i have a baffle with doors in it. mine are rubber but same idea. I am leaning towards an accusump in an effort to fill in these dips. looking at my data log how well do you think it would do the job? what size unit do you think i need? Its not like the surge lasts a long time..

Leafy

iTrader: (1)

I want to see how my hole in the back of the block works out. I know right now that if the AN fitting on the hose isnt tight is pukes a bunch of oil, even at idle. That why I missed my dyno appointment. But the line ends up traveling higher than the top of the head before going to the catch can so it should be ok. I also know at idle that you can still feel the pulses coming out of the valve cover port with that line. And that the hose to the side of the block sounds cool as **** if you hold it up to your ear, like a real lumpy v8. I think you just need to drill more holes in things Bob.

jmann

I went through my motor this winter 300+ whp and after 12 track days found no evidence of rod brg problems with ACL brgs, in fact since they were new the previous season I reused them and the mains, just installed a new trust brg. I think with synthetic oils it is far less of an issue. I tend to agree with Savington as far as it being a none issue. Depending on how you brake [% with engine verses brake pedal] the load on the rod bearings is probably greatest at off throttle as it is under a high compression load at very high rpm.