Seat mounting thread #194,324,111
#81
I have a pretty large recline angle on my Cobra Suzuka seat. I played with that when installing it. Any more recline I become too close to the pedals and the headrest is located in a place where my head can contact the roll hoop too easily. The extra 10 degree or recline gave me about 0.3" or so more head clearance but ergonomics and safety were worse in that position.
FG version
https://www.levelxms.com/tillett-b6f-racing-seat
Carbon version
https://www.levelxms.com/tillett-b6f-carbon-racing-seat
Another guy in KY just bought a B6F and I'll be making a set of miata-specific brackets for him soon. I can easily make a set for you too. I haven't settled on a price yet but they'll be cheaper than the Tillett brackets for sure.
#83
Just thought I'd share how I did my set bracket. This is for a Cobra Suzuka Pro. I copied the designs posted earlier in the thread. $35 brackets off ebay and $15 of steel material. I drilled a new hole to get the read side mounts as low as possible then sloted the fronts a little more as require to hit all 3 angles.
Rear humps removed and captured nuts. Read bolts go through the bottom with a backing plate. This makes it much much easier to pull the seat.
I'm 6'1". the seat is 1/4" off the floor when installed. As low as I can possibly go. I played with the tilt of the seat and the best I can get was 1/2" clearance to the broomstick. 3/4" with the seat cushion removed. With my helmet I'm 1/2" ore more above the broom stick.
That's not cutting it. The new plan is to go back to the sparco sprint I had in. The "sling/hamock" style will get me a bit lower than the fiberglass shell. They I plan to slouch down a bit in it and pour a 2 part expanding foam seat mold. It looks like it will give me the proper clearance I need.
From my build thread. (https://www.miataturbo.net/build-thr...rged-nb-87904/)
The Seat is 1/4" from the floor. As low as I can get it
Still not enough clearance when I put on my helmet
Upright I'm pretty much net with the broom stick
Slouched down I have come clearance. I'm going to try a mold a seat insert around me in this position.
Rear humps removed and captured nuts. Read bolts go through the bottom with a backing plate. This makes it much much easier to pull the seat.
I'm 6'1". the seat is 1/4" off the floor when installed. As low as I can possibly go. I played with the tilt of the seat and the best I can get was 1/2" clearance to the broomstick. 3/4" with the seat cushion removed. With my helmet I'm 1/2" ore more above the broom stick.
That's not cutting it. The new plan is to go back to the sparco sprint I had in. The "sling/hamock" style will get me a bit lower than the fiberglass shell. They I plan to slouch down a bit in it and pour a 2 part expanding foam seat mold. It looks like it will give me the proper clearance I need.
From my build thread. (https://www.miataturbo.net/build-thr...rged-nb-87904/)
The Seat is 1/4" from the floor. As low as I can get it
Still not enough clearance when I put on my helmet
Slouched down I have come clearance. I'm going to try a mold a seat insert around me in this position.
#84
Running some Infinit-Fab exige replicas, driver's side is on the Ryokurob mount. it's close but I still need to be further back and lower. the Exige style seat is very short under-leg though and I could use more support under my thighs.
Sat in a variety of Tilletts while in the UK and am really wanting to go that direction. Hoping to get some mounts from Jpreston as he's already got them figured out.
Seating is tricky in these cars, especially for us taller guys. There's also the shoulder room to contend with, as well as the tunnel - which is what got me into the Lotus seats.
Sat in a variety of Tilletts while in the UK and am really wanting to go that direction. Hoping to get some mounts from Jpreston as he's already got them figured out.
Seating is tricky in these cars, especially for us taller guys. There's also the shoulder room to contend with, as well as the tunnel - which is what got me into the Lotus seats.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM