Could someone help me come up with a good afr target table?
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Atlanta, GA
Posts: 289
Total Cats: -2
Could someone help me come up with a good afr target table?
Well so far I think I've been alright at diy'ing it and trying to figure things out for myself but with this one I just don't want to risk using my limited tuning knowledge and really ******* things up.
So I have a jr m45 sc setup with the mspnp on a 96. It makes 5-6 pounds of boost and it comes in like any other supercharger does. I found a couple of other afr target tables from other people running ms with their sc's but they're both a bit different.
Here's a comparison of what I've found. I'm not looking for the be all end all of target tables, just something a bit more appropriate to datalog to instead of the stock 96 table.
Any help would be really appreciated, thanks a lot.
So I have a jr m45 sc setup with the mspnp on a 96. It makes 5-6 pounds of boost and it comes in like any other supercharger does. I found a couple of other afr target tables from other people running ms with their sc's but they're both a bit different.
Here's a comparison of what I've found. I'm not looking for the be all end all of target tables, just something a bit more appropriate to datalog to instead of the stock 96 table.
Any help would be really appreciated, thanks a lot.
#5
I'd check out this thread and make the changes. it will make things 100000000000 times easier
https://www.miataturbo.net/forum/t28005/
https://www.miataturbo.net/forum/t28005/
#11
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Atlanta, GA
Posts: 289
Total Cats: -2
I'd check out this thread and make the changes. it will make things 100000000000 times easier
https://www.miataturbo.net/forum/t28005/
https://www.miataturbo.net/forum/t28005/
Thanks mate. I really appreciate all the examples.
#13
Junior Member
Thread Starter
iTrader: (1)
Join Date: Apr 2008
Location: Atlanta, GA
Posts: 289
Total Cats: -2
Yeah that's what I suspected but it got to the point where I just wanted it running after working on it for a couple weeks none stop.
quick question - considering the car switches into open loop at around 100kpa or so, how come people tune so much over it?
quick question - considering the car switches into open loop at around 100kpa or so, how come people tune so much over it?
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM