Rotrex AFR Table Advice
#4
Here's mine.
I assume you're pushing about 10 pounds of boost, too. I don't know why you would need to go richer than 14.7 below 100 kPa load. In fact, when I was driving her to and from track events, I had a leaner AFR at highway cruise speeds to save some fuel, but that's not down at 2900 rpm or 15 kPa.
Go to trubokitty.com and look for the files for your specific year car/MS version.
Put at least some of your build in your sig block so we know what you're running.
I assume you're pushing about 10 pounds of boost, too. I don't know why you would need to go richer than 14.7 below 100 kPa load. In fact, when I was driving her to and from track events, I had a leaner AFR at highway cruise speeds to save some fuel, but that's not down at 2900 rpm or 15 kPa.
Go to trubokitty.com and look for the files for your specific year car/MS version.
Put at least some of your build in your sig block so we know what you're running.
Last edited by poormxdad; 06-26-2022 at 10:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
poormxdad
MEGAsquirt
5
04-15-2017 02:05 PM