AWR mounts vs SSK to help missing 3rd gear?
#41
Elite Member
iTrader: (5)
Join Date: Jul 2006
Location: Central California
Posts: 2,549
Total Cats: 4
These should work well! Been using the 70 durometer, 1.5" poly's, and while it's calmed down, I'd prefer quieter. These are rubber leaf spring bushings for a GM, part # HB-902. Feels rather firm, but I'm sure they are a little softer than the poly, plus I think rubber has better damping characteristics. Probably need to be cut slightly, and I doubt the sleeve will fit ... hope that's not an issue. Will install soon.
Measurements:
Overall length = 1.75"
Barrel length = 1 3/8"
Lip length = 3/8"
Barrel diameter = 1 1/2"
Bolt hole = 9/16"
Measurements:
Overall length = 1.75"
Barrel length = 1 3/8"
Lip length = 3/8"
Barrel diameter = 1 1/2"
Bolt hole = 9/16"
Thread
Thread Starter
Forum
Replies
Last Post
messiahx
General Miata Chat
4
07-11-2009 03:25 AM