Axle seal
#1
Axle seal
I thought my pinion seal was leaking, but after cleaning up the diff I see that the axle seal on the driver's side is leaking. The exhaust is real close and probably cooked it. It will get heat wrapped. I need to go over the procedure to replace the seal. If I remember correctly. Disconnect the sway bar and the uprights and I should be able to yank the axle? Pry out the old seal, tap in a new one. Put the clip so the open end is up, on the axle. Push it in. If I missed anything or got it wrong, please someone let me know. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Thorpedo
Suspension, Brakes, Drivetrain
8
07-17-2023 07:04 PM
Blkbrd69
Suspension, Brakes, Drivetrain
8
03-27-2019 11:56 AM
tuckermon
Suspension, Brakes, Drivetrain
2
09-21-2017 07:08 PM