You need to read. Start in the main thread and go backwards if you'd like. You've been fed the answer to every question in here. Every question you've asked has been addressed in the last 6 months of that thread in addition. There's pros and cons to everything. Including top hats. Pick what you're comfy with.
You have been given the tools. Now you need to put on your big boy pants and make a decision. There's really not any more info to gather. It's all been slid into your gaping maw like a mother bird feeding her chick. |
ISC isn't junk. It's just not pretty. It's functional.
All NB info will translate to the NA. Don't get it twisted. |
Originally Posted by sixshooter
(Post 1497499)
ISC isn't junk. It's just not pretty. It's functional.
All NB info will translate to the NA. Don't get it twisted. I drove a car tonight with xida gen 2, just around the block, and 700/400 felt good. stock NA suspension is a joke. i threw the car in a corner and it didn't roll it's face to the floor. also: goodwin racing has extended rears for $75 each if i want to spend more. and they don't recommend extending the front because "Using extended travel top hats in the front can allow the tire to contact the inner wheel well." |
Originally Posted by ThePanduuh
(Post 1497504)
see, there WAS a full set of isc extended top hats for $110 shipped.
;) |
Originally Posted by Fireindc
(Post 1497508)
Yeah there was. But someone else reading this bought them already.
;) i should have bought those. but didn't obviously because i was told they were "junk" and missed out. now i'll be paying for it. |
Originally Posted by ThePanduuh
(Post 1497509)
so what are you doing lol
i should have bought those. but didn't obviously because i was told they were "junk" and missed out. now i'll be paying for it. As for my build, I'm still figuring the rest out. Probably NB billies and transfer over my current 425/300 GC spring/perches from my KYB's and FCM 36mm bumpstops that I already have. Still to be determined though as I read through the mountains of information out there. |
The ISC have no provisions to truly keep the shaft located. Tons of examples where the middle holes have been wallered out.
OP if you want our advice, ask us. If you want Goodwin's advice, ask them. Stop playing people against people. You were already informed in this thread in which scenarios Goodwin's hats will work in the front. You were already informed exactly what you needed to do to make their hats work in the front, if you fall into one of those scenarios in which they will work. It's REALLY aggravating. |
shocks 101
The simple truth is that there are no high quality/ high performance coilovers for the NA/NB at $1000.
By high performance, I don't necessarily mean lap times with race tires. High performance in context of a the average daily diver that sees some sporting use is low NVH, compliance, responsiveness and control. NVH: High frequency vibration from road surface or sympathetic vibrations in the car. A small piston with poor pressure balancing and cheap, high friction parts working through sloppy tolerances will simply not absorb and dampen the little road texture type of inputs. That "noise" then makes other stuff in your 25 year old car rattle (sympathetic vibrations). Good shock cost money to build, but they can look just like cheap shocks. Compliance: Oversimplified, is bottoming resistance. This is a combination of adequate low speed damping with enough oil flow at high piston velocities to absorb big sharp impacts. It also requires the correct shock body length for the ride height, vehicle weight and spring rate being used. Bump stop dimensions, geometry, material, durometer and hysteresis also factor in acutely. Rebound damping and droop travel effect how the shock feels on the other side of that big hit. Some shocks might absorb the actual bump but kick hard in rebound because they lack sufficient rebound blow off for higher piston speeds and also lack sufficient droop travel. Cheap shocks get everything wrong and crash through medium sized bumps then yank you against the belts on rebound. Good shocks "bloop" through the bump with barely a nudge, quickly settling to static ride height with no sharp jolt. This big hit performance is never an accident. It's engineered. Responsiveness: Low speed damping. Impact from the road surface generate high shock piston speeds. Lower piston speeds, say below 3 in/sec are largely driver inputs; Steering, braking, throttle. Too little low speed damping and the car feels sluggish or wallows after an input. Too much low speed damping and the car feels quick but also jittery and nervous, not "planted". A poorly designed or cheap shock might nail the low speed but not be able to decrease damping enough for higher piston speeds. What you get then is good response but bad ride quality in general. The much loved Tokico Illumina do this. Almost enough low speed damping on stiff settings but harsh, jarring ride quality, Turned to softer settings, they ride OK but wallow like you have half inflated tires. For some drivers, this is "almost right" is acceptable. Good shocks will provide that platform of low speed damping while still absorbing big hit/ high piston velocity impacts well. Control: This is am amalgam of all the qualities described above. Bottoming resistance, a good low speed damping platform, good high speed blow off, heat rejection so the shocks act the same after a 30 minute drive on a hot day, enough NVH absorprtion so the drive can feel the road texture without being overwhelmed by "noise" coming up through the seat and steering wheel. For years, we have recommended DIY Bilstein setups for budgets under $1000. FM or Tein lowering springs or ebay sleeves and 450-550 fronts paired with 300-350 rears. The Bilstein is the highest quality shock in this price range. Damping rates aren't perfect and the bodies are a tad too long but is as close as you are going to get until something better comes along. The next step is, well, you already know that answer. |
Originally Posted by concealer404
(Post 1497480)
You're not alone. Every question he's asked in here has been fed to him.
And then dudebro sends me a PM with links to Shaikh's feel good chakra BS. I'm good. I've spent more time and effort in this thread than it actually takes me to build one of these setups. If it makes you feel any better, there's likely a lot of newbs/lurkers reading that will still get value from the thread. |
Originally Posted by maplewood
(Post 1498457)
If it makes you feel any better, there's likely a lot of newbs/lurkers reading that will still get value from the thread.
|
This is a thread of garbage, punctuated with spoon feeding, with very little actual information for learning and leading people to make their own decisions. It's best to understand what you're doing, before you do something like this. This thread goes 100% against that.
The other thread has everything, as we've posted dozens of times in this thread. You ARE supposed to figure it out on your own. That's how you're sure you're making the decisions that best fit your needs. That thread is an education. This thread is McDonald's. |
And now there's two threads for noobs to read through.
|
Yep. Makes the signal:noise ratio twice as bad.
|
Originally Posted by concealer404
(Post 1498661)
Yep. Makes the signal:noise ratio twice as bad.
|
|
thanks for the lead! but fortunately I've found someone who, without being an asshole, explained to me what I should need based on what he has done in the past, including what he's done to achieve the same ride height I've done, and guess what?? He makes custom top hats (made from NB top hats to any length you want), machines Hard S shocks for lower circlips, machines ebay sleeves for the circlip, and sells them both at very reasonable prices, comparable to Maruha for top hats WITH fresh NB bushings!
Using his stuff, I save about $250 (bringing total cost to ~$750). I'm going with 25mm (1") extended top hats all around. And he also recommended some bump stop lengths to start with (much wow) for that ride height. He does this all in house. He does not get rich from this, but does it as a hobby. He's a very cool dude that was easy to talk to and wasn't a stubborn asshole who wants me to take my car apart 500 times before I arrive at the end state, and I'm definitely hitting him up when I'm ready to buy. |
So, this is your juvenile passive aggressive way to tell us that you found someone that told you all the same stuff that we told you in this thread, with the addition of bump stop length that nobody could possibly make a guess at until you decided exactly which top hats you were going to use?
Nice. Congrats. For the amount of ridiculous spoon feeding you required, you do not get to call us assholes for helping you. |
Originally Posted by concealer404
(Post 1499136)
So, this is your juvenile passive aggressive way to tell us that you found someone that told you all the same stuff that we told you in this thread, with the addition of bump stop length that nobody could possibly make a guess at until you decided exactly which top hats you were going to use?
Nice. Congrats. For the amount of ridiculous spoon feeding you required, you do not get to call us assholes for helping you. I wish you all luck with new members. |
Originally Posted by ThePanduuh
(Post 1499139)
aaaand again, your idea of "spoon feeding" is ridiculous. If I wanted you to come to my house and build them for me that's one thing... but if so many people are doing this, why can't anyone post up what setup they're using, what issues they ran into, final cost, things that would help noobs get an idea of where to get started and what they're getting into. So far everyone I've talked to has called you (all of you) assholes. Again I refer to the point of the forum being for documentation purposes... But if no one documents anything, how does anyone know if you even did it?? You are indeed assholes for being stubborn, aggressive know it all's. If you know so much, why not make a one stop thread, "beginner bilstein coilover thread," where you can talk about rates, top hat configs, bump stops, how ride height will change the combination of those three... That thread is 80 pages of information that's scattered throughout the whole 80 pages. There has to be a way of summarizing that, and modernizing it to bring it up to 2018. Sorry not everyone has 3 cars, 4 different setups available to them at all times, and doesn't want to rip their car apart 17 times getting their setup perfect. If there was some guidelines then maybe you only have to rip it apart 2 or 3 times.
I wish you all luck with new members. |
Originally Posted by brainzata
(Post 1499140)
Most here have read through everything possible in order to come to conclusions by themselves rather than trust in one single opinion. You are just too fucking lazy. No one deserves to be spoon fed off others hard work. It's your job to use others hard work to make your own conclusion and not start demanding time from others to help you decide because you don't want to put in the effort to figure it out. Get off your race car bed and go find answers by yourself so you can be sure through lots of reading that you found a common answer and it makes sense to you. Not just because someone told you so.
|
All times are GMT -4. The time now is 11:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands