Anyone have a good set of 4?

 

I have six of them however they probably need to be flow tested and cleaned. And they need new o-rings and such.

I have no need for them as I have 460's that I'm going to be using.

Let me know if you're interested.

 

I have a set of 295cc low ohms you can have....

 

Saw a set on the miatanet classifieds today for something like $60.

 

PM Sent

 

Let me know if you still need a set. I'm thinking about pulling the 305's off my car. Had them on the car for a week. They were cleaned and flow tested before I put them in.

 

Looking Again!

Well, I got fucked by the guy on Miata.net

He is Troy Augustin of Conyers, GA. Advertised them as high impedance and perfect. Turned out to be low impedance and filthy with the rubber shot.

Didn't mind the dirt and rubber 'cause they were going to be cleaned and refurbed anyway, but he refused a refund even after I initially offered to ship them back at my expense.

He goes by cheappartz@hotmail.com and his Paypal is ssampson77@hotmail.com

Beware of this vendor.

 

bruce, if you can deal with buying $20 resistors & wiring them, I'll send you my 295cc injectors for postage.

 

If you have a Fry's near you, they have 10 ohm 10 watt resistors for $1/each.

ooo... just looked up ratshack. they have 8 ohm 20 watt non inductive resistors for $2.50/ea.

 

Thanks, I know I can add the resistors, but they are going on another Mob member's car(http://www.miatamob.org) and the simpler I make it the better. Since I've got my motor out for a few weeks, I put my 305's in and I'll get another set cleaned and flowed for mine.