Splitime's VQ35DE build. Miotta goes V6 :)
#71
Miotta FTW!
Thread Starter
iTrader: (24)
Join Date: Jun 2006
Location: Chicagoland, IL
Posts: 4,290
Total Cats: 31
Nissan security can be fixed with an UpRev reflash. (IF the ecu/car/motor has UpRev support) Remove the NATS and then its just down to typical wiring.
I'm trying to pick a clutch/flywheel package for the car right now. No new fabrication yet.
I'm trying to pick a clutch/flywheel package for the car right now. No new fabrication yet.
#72
Yes we have looked into uprev and the vehicle did have uprev support until we decided to put a vk56 in it. They said that they could still possibly tune it but wanted the vehicle at their shop in texas to do it.
The engine wasn't the complicated part it's the on the fly 4x4 . But were getting things figured out now. Apperently after all the nats com and vics are wired correctly you have to put in a 5 digit code via consult 3 and teach all the nats com to speak the same language apperently there are five different types of this language.
It's getting there. As I said depending on how your swap starts rolling I may pick his vq40 up. I didn't before because all I saw was haltech and ms for the management. Haltech makes the swap too expensive to not go ls1. And ms you lose the vvt.
So if uprev works for you I may copy you and swap my 01 nb. Let me know what you think of pushing the stock LSD with this engine. Gearing is prolly too short.
These
motors sound
amazing though
The engine wasn't the complicated part it's the on the fly 4x4 . But were getting things figured out now. Apperently after all the nats com and vics are wired correctly you have to put in a 5 digit code via consult 3 and teach all the nats com to speak the same language apperently there are five different types of this language.
It's getting there. As I said depending on how your swap starts rolling I may pick his vq40 up. I didn't before because all I saw was haltech and ms for the management. Haltech makes the swap too expensive to not go ls1. And ms you lose the vvt.
So if uprev works for you I may copy you and swap my 01 nb. Let me know what you think of pushing the stock LSD with this engine. Gearing is prolly too short.
These
motors sound
amazing though
#76
Miotta FTW!
Thread Starter
iTrader: (24)
Join Date: Jun 2006
Location: Chicagoland, IL
Posts: 4,290
Total Cats: 31
Mine is being done by a buddy who tunes.