Intercooler piping and DIY
#1
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jul 2007
Location: NYC
Posts: 5,710
Total Cats: 3
Intercooler piping and DIY
1. Question for the diy'ers that have the compressor outlet pointing down.
How are you guys assembling, where are you getting the pipes for the hot side?
2. If you have a T25 and have the outlet facing upwards.
How did you assemble your intercooler piping, and please post pics.
Thank You
How are you guys assembling, where are you getting the pipes for the hot side?
2. If you have a T25 and have the outlet facing upwards.
How did you assemble your intercooler piping, and please post pics.
Thank You
#10
My layout it almost exactly the same as m2cupcar's 2nd diagram, except I welded up the transitions to the TB and compressor outlet rather than using 45 or 90 degree silicone hoses.
Jeff
#15
Elite Member
Thread Starter
iTrader: (9)
Join Date: Jul 2007
Location: NYC
Posts: 5,710
Total Cats: 3
-----------
Heres a question.
One of the threaded bungs for the wastegate bracket has no end. Its just a hole straight into the compressor housing, while the other has an end. Is that normal? I am guessing this is normal but with the bracket attached it seals the hole, but without it its gonna leak.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM