What Req fuel value for Rx8 Yellow's?
#5
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,494
Total Cats: 4,080
i thought 420cc.
you'll also need to adjust your cranking pulse width table and your accel enrichments should be reduced in the same fashion. however, you must remove 1ms from the math before reducing the cranking, then add that 1ms back. the cranking table accounts for the opening and closing time.
example: 60*F = 4ms
230 -> 460cc injectors.
4ms - 1ms = 3ms
3/2 = 1.5
1.5 + 1 = 2.5ms
you'll also need to adjust your cranking pulse width table and your accel enrichments should be reduced in the same fashion. however, you must remove 1ms from the math before reducing the cranking, then add that 1ms back. the cranking table accounts for the opening and closing time.
example: 60*F = 4ms
230 -> 460cc injectors.
4ms - 1ms = 3ms
3/2 = 1.5
1.5 + 1 = 2.5ms
#6
Junior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Marietta, Ga
Posts: 223
Total Cats: -1
I will check and make sure my cranking pw and accel enrichments are adjusted properly, and I will adjust my req fuel value with the 420cc number. I am taking the car to ed senf at balanced performance on Feb 14th to be tuned for 15-17psi. I'm not sure if he's going to start from scratch or what his methods are, so I guess we'll find out.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM