Turbo close to PS line & coolant hose
#1
Turbo close to PS line & coolant hose
First off, NO I'M NOT DELETING THE POWERSTEERING. As you can see in the pic, the outlet of the turbo (the yellow tape) is hitting the PS hose. It's also right above a coolant hose as well. Any suggestions on how I should re-located/move/possibly shorten that PS hose? Should I keep it as far from the outlet as possible? Same goes for the coolant hose. You can't see in the pic, but it's about 2 inches from the outlet of the turbo. I figured once the piping gets attached to the outlet, I could heat wrap that coolant hose or just make some heat shield to protect it.
Thread
Thread Starter
Forum
Replies
Last Post