Help with Bipes please
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jun 2006
Location: Wisconsin
Posts: 1,269
Total Cats: 7
Help with Bipes please
I installed my Bipes ACU in my '96 this afternoon, following the instructions. When I got it all connected, I turned the key and all I got was cranking, the engine won't start. With key on, all lights on Bipes are lighted, no matter what display mode it's in.
I tried hooking the two CAS wires into the CAS IN on the Bipes, but still only cranking.
I hooked my CAS wires back together as they were stock, to bypass the Bipes, and the car starts, but idles very rough, and smokes a little.
I also got a P0340 CEL, Crank Position Sensor System Malfunction.
Does this mean I have to replace my CAS???
**EDIT** CEL went away, car still idles like crap, but acts normal with throttle **EDIT**
I tried hooking the two CAS wires into the CAS IN on the Bipes, but still only cranking.
I hooked my CAS wires back together as they were stock, to bypass the Bipes, and the car starts, but idles very rough, and smokes a little.
I also got a P0340 CEL, Crank Position Sensor System Malfunction.
Does this mean I have to replace my CAS???
**EDIT** CEL went away, car still idles like crap, but acts normal with throttle **EDIT**
Last edited by SamS; 07-08-2006 at 05:19 PM.
#2
Make sure your conections are tight ESPECIALLY the main plug from the box!
I had trouble with this for a long time before i realized what it was.
Goodluck!
This might help https://www.miataturbo.net/forums/showthread.php?t=2597
I had trouble with this for a long time before i realized what it was.
Goodluck!
This might help https://www.miataturbo.net/forums/showthread.php?t=2597
#5
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jun 2006
Location: Wisconsin
Posts: 1,269
Total Cats: 7
Well, I figured it out....
I had the Bipes turned upside down so that I wouldn't get confused by up being off, and down being on with those switches. Thing is, I then put all the wires in backwards.
Once I finally figured that out, car runs like a dream.
Thanks guys!
SamS
I had the Bipes turned upside down so that I wouldn't get confused by up being off, and down being on with those switches. Thing is, I then put all the wires in backwards.
Once I finally figured that out, car runs like a dream.
Thanks guys!
SamS
Thread
Thread Starter
Forum
Replies
Last Post
symphonicreverb
Cars for sale/trade
10
01-19-2007 07:25 PM