quick one

Reply Subscribe

Thread Tools

Search this Thread

10-18-2007, 01:48 AM

Fallin Blade

Junior Member

Thread Starter

iTrader: (1)

Join Date: Jun 2006

Location: San Diego, CA

Posts: 70

Total Cats: 0

quick one

ok really easy. . . . .
T3 turbo, BEGI mani & DP, EMB, 305'S, Oil lines. Is this enough for a DIY/greddy replica or will i still need a afpr. Sorry searched for the answere but it all came back mixed.

10-18-2007, 01:59 AM

akaryrye

Elite Member

iTrader: (5)

Join Date: Jul 2006

Location: Central California

Posts: 2,543

Total Cats: 4

What boost level are you plannin on running? I am going to guess that the 305s at stock fuel pressures are going to max out between 4 and 6 psi

10-18-2007, 02:04 AM

Fallin Blade

Junior Member

Thread Starter

iTrader: (1)

Join Date: Jun 2006

Location: San Diego, CA

Posts: 70

Total Cats: 0

Right now yeah about 5 psi, later i want to move up but right now thats it. I dont have to use the 305 either right, or should i?

10-18-2007, 02:23 AM

akaryrye

Elite Member

iTrader: (5)

Join Date: Jul 2006

Location: Central California

Posts: 2,543

Total Cats: 4

I dont know much about EMB, other than its the most basic of the Greddy Emanage Series. We have an e-manage section on the forum and I think its in your best interest to spend some time there and get a good understanding of what you have to work with as well as what others have done or are doing.

10-18-2007, 08:15 AM

samnavy

Elite Member

iTrader: (7)

Join Date: Apr 2006

Location: VaBch, VA

Posts: 6,451

Total Cats: 322

NO, you don't HAVE to run 305's... I'm not sure what the upper limit of EMB is on injectors, but I know guys run up to 460's... if you search and find dudes running 550's, that would be your best bet for overhead and future growth. There is an Emanage forum, I'd start there.

I'd also plumb in your BOV now just in case you get a boost spike somewhere down the line you don't hurt your turbo.

10-18-2007, 08:25 AM

magnamx-5

iTrader: (7)

Join Date: Jul 2006

Location: nowhere

Posts: 8,255

Total Cats: 4

you should be fine

10-18-2007, 08:49 AM

Braineack

Boost Czar

iTrader: (62)

Join Date: May 2005

Location: Chantilly, VA

Posts: 79,494

Total Cats: 4,080

305s with the EMB should be good for 6-7psi

10-18-2007, 10:20 AM

Fallin Blade

Junior Member

Thread Starter

iTrader: (1)

Join Date: Jun 2006

Location: San Diego, CA

Posts: 70

Total Cats: 0

Sweet thanks, so i take it when i want to move the power up a little i will start with afpr and fuel pump. I mean for fueling that is.

10-18-2007, 10:49 AM

Braineack

Boost Czar

iTrader: (62)

Join Date: May 2005

Location: Chantilly, VA

Posts: 79,494

Total Cats: 4,080

you could get away with no fuel pump and just the fmu. pumping to 70psi would give you a lot of room to grow.

10-18-2007, 11:09 AM

#10

Loki047

Elite Member

iTrader: (6)

Join Date: Sep 2005

Location: Chicago

Posts: 4,143

Total Cats: -5

is r kelly really your uncle? Cause if hes not i dont get it.

10-18-2007, 03:04 PM

#11

Fallin Blade

Junior Member

Thread Starter

iTrader: (1)

Join Date: Jun 2006

Location: San Diego, CA

Posts: 70

Total Cats: 0

No he is not before the all the avatars went away i had a calvin character mith a mazda shirt on pissing on a Honda emblem. Your right its pretty stupid with out the avatar.