Newest plot
#1
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
Newest plot
Had trouble with my EBC holding properly on the dyno.
What you see in the first plot is a 12psi spike to a drop to about 5psi then holding at 9psi.
The second plot is a 9psi spike to a 7psi drop then holding at 9psi. I estimate that run would be a good 190hp/170tq without that flat spot.
New dyno runs will come soon at 10psi and with a MBC.
What you see in the first plot is a 12psi spike to a drop to about 5psi then holding at 9psi.
The second plot is a 9psi spike to a 7psi drop then holding at 9psi. I estimate that run would be a good 190hp/170tq without that flat spot.
New dyno runs will come soon at 10psi and with a MBC.
#9
Boost Czar
Thread Starter
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
I'm testing the product before they sell them. They are perplexed as why it behaved the way it did. And now it plain doesn't work, but Bripab007 has been rocking his for over 6 months without a glitch. Otherwise it was working great. It might even have just been a failing silenoid, I will be replacing that out shortly to see what failed. Just trying to replace my window regulator motor first. Those damn things are hard to come by for a good price.
Thread
Thread Starter
Forum
Replies
Last Post
TurboTim
Miata parts for sale/trade
12
05-28-2009 07:05 PM
TurboTim
DIY Turbo Discussion
53
05-04-2009 01:59 PM