So, let's talk about injectors
#1
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2010
Location: Seattle, WA
Posts: 3,611
Total Cats: 25
So, let's talk about injectors
I currently have RX7 550ccs.
I have just gotten an opportunity at an absolutely killer deal on RX8 440ccs (425ccs? 490ccs? I don't know, yellow rx8s).
From what I understand, they max out at ~230rwhp, which goes against the majority of my build (I am building everything except for turbo to 300rwhp, although my end result will end up being nowhere near that.)
But reading on several sites, 60psi fuel pressure puts them where I need them. Can I just throw on a fleaBay FPR and set it and forget it at 60PSI? I'd ------- love to replace the stock FPR, it's given me so much angst to date.
I have just gotten an opportunity at an absolutely killer deal on RX8 440ccs (425ccs? 490ccs? I don't know, yellow rx8s).
From what I understand, they max out at ~230rwhp, which goes against the majority of my build (I am building everything except for turbo to 300rwhp, although my end result will end up being nowhere near that.)
But reading on several sites, 60psi fuel pressure puts them where I need them. Can I just throw on a fleaBay FPR and set it and forget it at 60PSI? I'd ------- love to replace the stock FPR, it's given me so much angst to date.
#11
If I had a return style fuel system that's what I would do. I have heard the rx8 injectors have a better spray pattern than the older rx7 injectors. I meant a rising rate fpr, you would most likely run rich at idle with 60psi and 400cc+ injectors.
Bump the pressure, profit. I guess it all depends on what your goals are?
Bump the pressure, profit. I guess it all depends on what your goals are?
#12
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2010
Location: Seattle, WA
Posts: 3,611
Total Cats: 25
If I had a return style fuel system that's what I would do. I have heard the rx8 injectors have a better spray pattern than the older rx7 injectors. I meant a rising rate fpr, you would most likely run rich at idle with 60psi and 400cc+ injectors.
Bump the pressure, profit. I guess it all depends on what your goals are?
Bump the pressure, profit. I guess it all depends on what your goals are?
As for my goals: 60psi with the RX8 injectors exceeds anything I'll ever get to with the Miata, so....
#16
Elite Member
iTrader: (2)
Join Date: Jan 2007
Location: Los Angeles, CA
Posts: 8,682
Total Cats: 130
Blane how about you stick your dick in your ***?
Also, ebay regulator is big fail. They die. I would not put ebay anything near my fuel.
I like my little aeromitive that comes with the -6 fittings. Yay. .
Also, ebay regulator is big fail. They die. I would not put ebay anything near my fuel.
I like my little aeromitive that comes with the -6 fittings. Yay. .
#17
Elite Member
Thread Starter
iTrader: (6)
Join Date: Sep 2010
Location: Seattle, WA
Posts: 3,611
Total Cats: 25
Can I stick my dick in your *** and hit you with a hammer instead?
Yeah, was looking at RX8 + aeromotive. Total cost would have been $150 or so for the setup at my cost.
But if Sav and Reverent say go EV14, I'm goin' EV14.
Also, ebay regulator is big fail. They die. I would not put ebay anything near my fuel.
I like my little aeromitive that comes with the -6 fittings. Yay. .
I like my little aeromitive that comes with the -6 fittings. Yay. .
But if Sav and Reverent say go EV14, I'm goin' EV14.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM