Pics for Scott & Brian...
#1
Senior Member
Thread Starter
iTrader: (14)
Join Date: Nov 2004
Location: Ambler, PA
Posts: 1,275
Total Cats: 1
Pics for Scott & Brian...
...the "is your valve cover breather routed to vaccuum" gestapo. :gay:
Since I routed the AFM straight off the turbo with a silicone hose (b/c suspension changes required it), I had nowhere to route the breather line to. After reading the millionth post by these two about routing the breather correctly, I drilled, tapped, and JB welded for good measure a line into the back of my RX-7 AFM where it would not hit anything. Just waiting for the catch can to arrive to make the setup complete. Happy guys?
Since I routed the AFM straight off the turbo with a silicone hose (b/c suspension changes required it), I had nowhere to route the breather line to. After reading the millionth post by these two about routing the breather correctly, I drilled, tapped, and JB welded for good measure a line into the back of my RX-7 AFM where it would not hit anything. Just waiting for the catch can to arrive to make the setup complete. Happy guys?
#4
Senior Member
Thread Starter
iTrader: (14)
Join Date: Nov 2004
Location: Ambler, PA
Posts: 1,275
Total Cats: 1
Kinda. It's the extra holding power to keep that crappy stock wastegate holding 15psi to redline. It seems that my stock GReddy wastegate + mbc can not accomplish that. Amazing that adding one helper spring does.
Last edited by brgracer; 09-18-2006 at 08:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM