4 wire TPS to 3 wire TPS conversion.... - Miata Turbo Forum -Boost cars, acquire cats.

Welcome to Miataturbo.net   Members

MEGAsquirt A place to collectively sort out this megasquirt gizmo

LinkBack Thread Tools
Old 07-11-2011, 09:02 PM   #1
Senior Member
Thread Starter
iTrader: (5)
Join Date: Jun 2010
Location: San Rafael, CA
Posts: 923
Total Cats: 19
Default 4 wire TPS to 3 wire TPS conversion....

I converted the TPS from a 4 wire to a 3 wire. There are 2 return signals coming out of the old Miata TPS. I ohm'd out the old sensor and used the line (red/black) that was the closest to the new one. It also had the greatest resolution. After doing the TPS setup in Megasquirt the numbers were 22 & 222. Does all of this sound ok?

1996 Miata MSPNP
k24madness is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
My solution for Oiltemp and Oilpressure input into Megasuirt (MS3) Zaphod MEGAsquirt 41 01-24-2016 12:25 PM
MSPNPPro-MM0105: Coolant Temperature Output slomiata MEGAsquirt 5 10-07-2015 01:11 PM
Going back to stock. Need some 1.6 parts. Trent WTB 2 10-01-2015 12:15 PM
Buzzing from driver side of engine bay? (MS3 install) nick470 MEGAsquirt 4 09-28-2015 10:10 PM
wiring wideband ground to battery terminal btabor ECUs and Tuning 10 09-28-2015 05:33 PM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 09:47 PM.