updated firmware on MSPNP 2 now runs like crap
#1
updated firmware on MSPNP 2 now runs like crap
Ok guys, upgraded my MSPNP 2 to Version 3.3 and now it runs like total ****. was running great battery died. had to change the battery. Then AC idle up wouldn't work any more on the variable resister on the board. Talked to Phil and he stated possible corruption with the firmware. SOOOO long story short updated firmware. checked settings in tunerstudio, reconnected the ignitor, fired it up and bam runs like ****. AFR will not change no matter what I do. I'm sure its something I'm missing. but I can't figure out what it could be.
#7
BUT if you have some things I need to make sure to check settings wise or anything else please let me know. going to work on it some more this evening.
#8
Boost Czar
iTrader: (62)
Join Date: May 2005
Location: Chantilly, VA
Posts: 79,501
Total Cats: 4,080
yeah, you need to go through the map section by section to make sure all settings still make sense. i notice a lot of times idle code will get turned off completely, or switch to warmup only or something odd.
Thread
Thread Starter
Forum
Replies
Last Post