Maxxis VR-1 245/40/15
#41
a 225 Hoosier is the same size as a maxxis 245. The maxxis is a 100qutg tire. so the hoosire is going to crush it, and everything else in the same size. i'm not looking at hoosires because you need to use them for competition and that's it. once you put 5 heat cycles in them they will start to fall off. so if you take them to a 2-day "track day". you can run 10 heat cycles and heat cycle them out. for a set of tires that costs over a $G that's not to appealing to me. i do 15-20 events a year and the fact the maxxis holds on for so long really lowers my operating costs.
$400 installed. I'd say I did ok haha
#42
And for someone like myself who is trying to do his first 5 track events this year, and will use them for about 5000 miles on the street, I can probably get 2 years worth of driving out of a set. I do keep the car stored in a garage that stays around 60* and take the car out occasionally in the winter to avoid flat spots and hardening of the rubber. Not sure if either of those 2 things are really problems over a 3 month storage period or if I'm just being obsessive. I got my maxxis used with 2 events on them and paid !
$400 installed. I'd say I did ok haha
$400 installed. I'd say I did ok haha
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#43
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,100
205 A6 on 15x8 vs 245 RC-1 on 15x9
#44
I don't like the feel of a stretched tire on track. it feels less forgiving. with the power i have i need all the forgiveness i can muster.
Eric Powell is very fast pte driver, and he runs the 205 Hoosier on a 9.
When i run autocross i like to run a 225 rs3 on a 9" wheel. At autocross it's much less about power, and getting it wrong doesn't have the same price.
Eric Powell is very fast pte driver, and he runs the 205 Hoosier on a 9.
When i run autocross i like to run a 225 rs3 on a 9" wheel. At autocross it's much less about power, and getting it wrong doesn't have the same price.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#45
My 245/40/15x9 sits really square compared to when I had the 225 RS3 on it. I hear some stretch is good for running lower pressures which with the power we really need. I have no personal experience to back any of this since I don't push my car that hard on country roads. My buddy who sold me the RC-1 found they did Best on his 2200lb car at around 20psi cold. He had them on a 15x10
#46
My 245/40/15x9 sits really square compared to when I had the 225 RS3 on it. I hear some stretch is good for running lower pressures which with the power we really need. I have no personal experience to back any of this since I don't push my car that hard on country roads. My buddy who sold me the RC-1 found they did Best on his 2200lb car at around 20psi cold. He had them on a 15x10
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#48
i bout the "deluxe" tire pyromiter and have yet to use any of the fancy functions. save your money and get the basic, it comes with a nice case. Longacre Economy Digital Pyrometer
I've seen lighter car on bigger tires take less pressure then me. but ambient temperature and driving style all play a role.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#49
I don't like the feel of a stretched tire on track. it feels less forgiving. with the power i have i need all the forgiveness i can muster.
Eric Powell is very fast pte driver, and he runs the 205 Hoosier on a 9.
When i run autocross i like to run a 225 rs3 on a 9" wheel. At autocross it's much less about power, and getting it wrong doesn't have the same price.
Eric Powell is very fast pte driver, and he runs the 205 Hoosier on a 9.
When i run autocross i like to run a 225 rs3 on a 9" wheel. At autocross it's much less about power, and getting it wrong doesn't have the same price.
#50
That's weird I feel the exact opposite. I feel the biggest reason I am consistently measuring faster lap times with a wider wheel is the improvement in brake away characteristics. The build up to exceeding maximum slip angle is more gradual with a bit of stretch in the sidewall. On radial tires with the sidewalls pinched any less than square they tend to snap loose when you exceed maximum slip angle making it much harder to stay smooth at the limits of traction. I haven't gone as far as 205 on 9 but if you are talking Hoosier 205's they are basically like most 225's.
#52
You and Bob have it right. When properly tensioned, a radial will have more linear breakaway characteristics. With the casing moving around, it becomes non linear, a ramp then a more sudden drop off with less peak grip. Not conjecture either. I've seen slip angle vs steering angle data at some point over the years but can't remember where.
__________________
#53
Next up 275 A7's on 11's.
#54
we've had this talk before. i just like the feeling of the "spring being wound up" that k24 mentioned. i'm just saying don't shy away from the 245's because you don't have a 10" wheel.
__________________
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
OG Racing
Your Source For Motorsports Safety Equipment
WWW.OGRACING.COM
800.934.9112
703.430.3303
info@ogracing.com
#55
Since I'm the guy who designs the wheels for them, and the primary instigator of the tire that is the subject of this thread (that I started), I'll make it clear for anyone who cares:
If all you have is 9's, don't buy 245/40's. Your car will work better with 225/45's. Buy the right tool and learn how to use it. Don't buy the wrong tool and learn bad habits to make it work.
/discussion about 245's on 9's.
Feel free to start a new thread about 245's on 9's if you are so inclined.
If all you have is 9's, don't buy 245/40's. Your car will work better with 225/45's. Buy the right tool and learn how to use it. Don't buy the wrong tool and learn bad habits to make it work.
/discussion about 245's on 9's.
Feel free to start a new thread about 245's on 9's if you are so inclined.
__________________
#56
Tires can be considered as springs and dampeners. They have resistance to compreshion and the dampening is built in. I know the scca f5 class uses rubber as the spring and shock (look it up, it's crazy to see for the first time.) so by stretching the tire your increasing the theoretical spring rate and dampen caricteristics. So If you can set up a car to run with or without tire strech. I can tell when the sidewall is squerming around on the rim. When i feel it i know it's time to behave. I have a harder time feeling the "squerming" when the sidewall is pulled tight.
Also in this case its the Kinematics that the sidewall deflection and the effect it has has on the natural contact patch of the tire. A pinched in tire will transfer normal force towards the outside shoulder as corner forces go up where as a stretched sidewall will transfer normal force to the inside shoulder of the tire. When combined these effects with the rest of the kinematics in the suspension the net effect is the the stretched tire maintains a much more consistent shape of contact patch and the center of pressure doesn't suddenly move from the outside edge further inboard as it exceeds its traction limit so everything is comparatively more stable at the limit.
The repeatedly measured improvement people Are getting with wheels being wider than tires I think is about half because the grip goes up a little with the stability gained in the contact patch center of pressure and about half because the break away characteristics improve stability and make it easier to drive at the limit.
#60
Emilio is right, that the 245/40ZR15 VR-1 will be very close (dimensionally) to the same size RC-1. Both have a measured section width of 9.8 inches. However, they do not share the same casing.
Regarding the best wheel width for competition use of the 245/40ZR15...
My personal preference is a slight stretch, but I always recommend testing. The clock doesn't lie.