Depends on weight. 103 might be a little optimistic. I did 101ish at 220hp.
|
Originally Posted by aidandj
(Post 1396051)
Depends on weight. 103 might be a little optimistic. I did 101ish at 220hp.
Maybe reading sonofthehill's thread are getting me too optimistic |
Originally Posted by Forrest95M
(Post 1396052)
Car has ps and abs with cc and ac deleted, still . Car is probably 2300lbs?
Maybe reading sonofthehill's thread are getting me too optimistic That'd be a pretty sweet use of ABS! Honestly, I wish I had ABS for only this reason. Well, and the fact that it helps save you from getting flat spots on tires too easily... |
ABS != LC. It can do traction control with extra hardware.
If it's your first trip to the strip then you are probably a bit optimistic. Launches are the most important part. |
Originally Posted by aidandj
(Post 1396103)
ABS != LC. It can do traction control with extra hardware.
If it's your first trip to the strip then you are probably a bit optimistic. Launches are the most important part. |
You can use the abs sensors to do traction control things, but the abs computer doesn't do anything but abs
|
Originally Posted by aidandj
(Post 1396128)
You can use the abs sensors to do traction control things, but the abs computer doesn't do anything but abs
|
MS1 has launch control. I haven't tried it.
|
Originally Posted by sixshooter
(Post 1396166)
MS1 has launch control. I haven't tried it.
|
Originally Posted by Forrest95M
(Post 1396249)
Really? I'm running the original v3.0 DIY kit, not a pnp, I remember seeing greddygalant running it on his gen 1 pnp along with flatshift.
https://cimg1.ibsrv.net/gimg/www.mia...56ad20c125.png |
Originally Posted by Forrest95M
(Post 1396045)
Planning on going to new england drag way in april for their street nights, any idea on what my car will run at 10 psi? Friends think it should be around 13.7 @ 101 mph
|
Originally Posted by sixshooter
(Post 1396377)
The only reason I asked is because I have no idea whether you have a 3.0 diy or gen 1 pnp. I don't know if you have to mod the gen 1 pnp to get launch control/ flatshift |
Originally Posted by The_WW
(Post 1396381)
I'm so down to make the trip up to Epping with you. Let me know when you go! Plus, I'll make you look great I've never dragged before. Would love to get kicked out because of no roll bar
|
Originally Posted by Forrest95M
(Post 1396389)
I think you can run no roll bar in epping as long as you don't run anything faster than like a 13 flat
|
Originally Posted by The_WW
(Post 1396390)
Oh thought it was a 13.99. Maybe that's for having a passenger? Either way I'm in
13.99 or faster needs a helmet 13.49 convertible or faster needs a rollbar, I doubt either of us will run under a 13.5 being my first time aswell |
Originally Posted by Forrest95M
(Post 1396391)
Wednesday Street Night New England Dragway
13.99 or faster needs a helmet 13.49 convertible or faster needs a rollbar, I doubt either of us will run under a 13.5 being my first time aswell |
I just hope my dump pipe doesn't qualify as an open exhaust
|
Going to assume it won't. They would need to look under the car to see where it ended. Imagine test and tune tech will be fairly straightforward
|
I'm in on this, epping is where i always go
|
I'm local to Epping but haven't been to the dragway in a while. Would love to get my car out there the same night you guys do, if I can get my car sorted out in time.
|
All times are GMT -4. The time now is 03:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands