|
With the boost signal sourced after the throttle plate, you'll have that overshoot going from part throttle to WOT. I'm not sure how people get around that when running EBC, but there must be a way.
|
you mean the source for megasquirt, or source for the boost controller?
megasquirt is of course sourced after TB in the intake mani. Boost source for EBC is at the compressor outlet. I tried making the boost target table linear, so it wont try to hit super high targets at part throttle, but i guess that didn't really work. |
I assumed your EBC was sourced at the same place as MS... my bad.
|
6 Attachment(s)
still gay but heres an update
GT2871R w/ .63 A/R V-band housing is here.... along with custom intercooler from ETS (no more george foreman grill front mount) Attachment 188454 Attachment 188455 Attachment 188456 Attachment 188457 Attachment 188458 Attachment 188459 |
yay!
send me your old intercooler |
I should be able to send you all you'll need other than the cold side "T pipe" + bov.... a 90 degree 2.5 coupler, and some misc clamps. ill send all i can spare
|
fuck chris
phillyb needs parts |
8 Attachment(s)
TURBO SETUP FOR SALE
Attachment 188216 just kidding.... removed the 'old stuff', going to send it off to get modded for EWG. Also, say herro to my rittle friend Attachment 188217 Attachment 188218 Attachment 188219 Here's some pics... GT2560R vs GT2871R Attachment 188220 Attachment 188221 Attachment 188222 Attachment 188223 |
16 Attachment(s)
Exhaust has been modded for EWG now... also got the high flow cat i put in the midpipe removed (was trying to reduce boost creep).
Soon all that crap + GT2871 will be on! |
Awesome build mate, quick question what paint was it that you used on the manifold?
|
So cool.... in for new dyno numbers.
|
Originally Posted by green_comet
(Post 765996)
Awesome build mate, quick question what paint was it that you used on the manifold?
I think the difference between fail and success is the prep work. I didn't sandblast the surface, which would be even better, but I roughed it up pretty good with sandpaper. Then applied several coats (whatever the directions said), and then baked/cured the paint in the oven...there's instructions for doing it on the car as well. Bottom line, I followed the directions and had no peeling or cracking or anything. With that said though, I'm probably going to get this properly ceramic coated before it goes back on.
Originally Posted by shlammed
(Post 766067)
So cool.... in for new dyno numbers.
|
7 Attachment(s)
Back from the dead.
Car has been running for a month or so on this setup. Been fiddling around and fixing various issues, but running pretty well at around 12psi... might bump it up to 14, if my injectors can support it (550cc). Wired a GM 3 bar MAP sensor into the MS and using the stock 2.5 bar one for baro correction. https://www.miataturbo.net/attachmen...ine=1320009911 https://www.miataturbo.net/attachmen...ine=1320009911 https://www.miataturbo.net/attachmen...ine=1320009911 https://www.miataturbo.net/attachmen...ine=1320009911 https://www.miataturbo.net/attachmen...1&d=1320010058 Properly welded IC piping with bungs (rather than ghetto rtv silicone) on the way. I did do a boost leak test though, and the RTV is holding it just fine. https://www.miataturbo.net/attachmen...ine=1320009911 |
3 Attachment(s)
|
i love you aaron! for real though what kind of shady ass place do you live in? End of the road, denalis, tractors!?
|
Hi
Where did you buy that I/C? |
he called ets and they made it to his requested dimensions
http://www.extremeturbosystems.com/ |
Cpolly is my new personal secretary guys. Please direct all questions to him and get with him if you'd like to set up an appointment, thanks
|
That was the deal right? My services in exchange for free parts, I'm still waiting on that turbo....:)
|
1 Attachment(s)
new ic pipes. no more just drilling and tapping into thin aluminum wall and using lots of RTV, lol.
https://www.miataturbo.net/attachmen...ine=1324514033 |
| All times are GMT -4. The time now is 11:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands