Noted. Goal right now is car ready for thunderhill, swank or not.

<p>Alright, got the shifter stuff figured out. Ed, I just need your stock shifter for a month or 2. I should be able to reuse the one from the auction car with a little rebuild kit.</p><p>The cut that bbundy sent me is for the larger bushing, and Ed's shifter is an MSM shifter so it should be no issue. Wont be able to get a tail housing extension gasket in time, so rtv will have to do. I wish I had a steam cleaner, I'll try some purple power but this thing is most likely going in dirty.</p><p>Rear trans seal will be replaced. Rear main seal also. I had such a fucking hard time replacing the input seal last time that I'm going to cross my fingers and say fukit.</p><p>Speed sender will also need to be swapped.</p><p>And some cool new. Borrowed my Dad's DSLR for the week. Going to be documenting all this stuff with some decent pictures. The FSM is pretty straight forward, but the pictures suck.</p><p>Here are some shots with it and the new parts from Bob. (yes im no good at cameraing)</p><p>https://www.miataturbo.net/attachmen...ine=1436236909<br />https://www.miataturbo.net/attachmen...ine=1436236909<br />https://www.miataturbo.net/attachmen...ine=1436236909<br />https://www.miataturbo.net/attachmen...ine=1436236909<br />https://www.miataturbo.net/attachmen...ine=1436236909<br />https://www.miataturbo.net/attachmen...ine=1436236909<br />https://www.miataturbo.net/attachmen...ine=1436236909<br />https://www.miataturbo.net/attachmen...ine=1436236909<br />https://www.miataturbo.net/attachmen...ine=1436236909<br />https://www.miataturbo.net/attachmen...ine=1436236909</p><p>&nbsp;</p>

<p>Also got an NB1 throttle body from concealer. Which will work for my VVT engine, but also gives me a good working TPS for once! Excited to play with AE and boost tables. I could have used different boost targets by throttle position on Friday. Some turns where I just want to maintain speed, but EBC would just blow straight to full boost, even at half throttle.</p>

Wooo progress.

I'll be giving you my megasquirt as well.

Did you get the measurements you needed from the diff bushings? I obviously don't need them back yet but hopefully will before the end of the month.

Holy hell time is flying. Might need Mazda badges for the s2k for Miatas at mrls...

<p>I did. I'll trade you for those. Make sure you don't leave work early, I'll try and get out before 5 and meet.</p><p>If you're bored, Ben and I are swapping the trans on wednesday. Hailey is making nachos.</p>

<p>About to pull the trigger on a G-Force&nbsp;Eliminator helmet. On sale for under 200, and have them in my size and color. I want a full face helmet, and need a second helmet.</p><p>Any last minute objections?</p>

Lol I'll ride with you again at some point let me get past my ptsd

Switching to star specs was a fucking world of difference. I never should have started on r-comps. So much easier to learn. I also changed my strategies. Start slow get faster, instead of start too fast and try and slow down.

Yeah he looked pretty good out there, for the two turns I was behind him.....

As for wednesday, i'll just be working all day, but my wife has been out of town for a week and that'll be her first evening at home so I really should be there.

I'll let you know if I can swing by though.

<p>AAA has been purchased. 200 miles should get me at least back to Oregon from Thunderhill :)</p>

<p></p><p>I'm mostly just in need of more instructing. The BMW day I got paired with Greg (the guy who runs it all) because my original instructer didn't show. Greg was a great instructor but you could tell he was focused on running an event instead of instructing me.</p><p><span>@curly you never responded about HOD in august :)</span></p>

Hold up. Miataroadster shifter things.

You mean to tell me that to convert a late 6spd MR shifter to an early 6spd, i just need the delrin bushing? The riser plate and everything else is the same?

Yes. The MR shifter uses the same bottom bit for everything. Just different bushings. That way he only manufactures one shift lever.

What about the riser? Aren't the pins different between transmissions? Or is that a 5spd vs. 6spd thing and not early vs. late 6spd?

As far as I know its just 5v6.

Ok cool. Now to lean on Vteckiller. Spanks!

Bill has a great write up about the diameter of all the balls and cups of the different transmissions. Someone who's not on a phone post it.

Done

Helmet backordered :( won't get it until late July.
<br />Got an extra tinted visor. Grand total was 220 after saferacer points.

<p>6 speed assembled. Tomorrow it goes in the car.</p><p>Rear main picked up, along with 2 quarts of Ford Magical Tranny Juice....</p><p> </p><p>I took so many pictures it was unnecessary. I even cleaned a few things, <span>@Jeffbucc was proud of me. Still needs a bit more purple power treatment.</span></p>