Originally Posted by Ryan_G
(Post 922745)
The only time my car has ever had problems reving like what you are describing was when my fuel pump decided to start dieing. It was slow and at first happened only sometimes like yours. Then it was all the time. I could not get the car to go over 65 mph because it would not rev that high. This would also explain why you could not find anything under the hood. It is worth checking but I could be wrong, just my 2 cents.
Originally Posted by Scrappy Jack
(Post 922739)
I love the dual nature of this car, even more with the option to remove the canards and rear wing.
Now that Hustler has gone normally aspirated in a quest for class competitiveness, your car may be the most heroic drive-to-and-from-the-track build running.
Originally Posted by Clos561
(Post 922759)
can i come over and have sex with those wheels?
|
Update:
So finally decided to go out with my mates and do some highway racing... Was sick fun. Won all my races :) Heres a vid of me and a 250awkw Wrx sti and my mates 300 rwhp Golf gti is the camera car... Its only a short clip i think.. and also here a quick one in a tunnel 2nd gear.. No traction and... yeah. http://www.youtube.com/watch?v=qB2T5...ature=youtu.be |
2 Attachment(s)
Update:
Last couple of weeks i went to the mx5 car club track day at Queensland Raceway.. It rained for a few of the session which was fun to get use to and suprisingly not as loose as i first thought it would be. Very stable. Got another pb on the sprint track when it dried up a bit which im stoked about :) Also built a front splitter.. Its supported via the subframe, front and side supports which go to the chassis rail. Atm its just 9mm ply. Interested to see how the car reacts at speed and whether the 9mm ply will be thick enough to not flex a lot at 200kph. Might but another piece of 12mm ply and lay the top with fibre glass just to be sure its gonna hold good. Anyways atleast i now have a template. Pics: https://www.miataturbo.net/attachmen...ine=1348212534 https://www.miataturbo.net/attachmen...ine=1348212534 |
Looks great, Charlie. I must admit, I wasn't a huge fan of how this thread started, too much "hellaflush" clubroadster stuff for me. But as a track car, it looks great. Especially with the Lightning McQueen eyes. Makes me want to sell my '99 so I can get an NA.
|
2 Attachment(s)
Update:
So the other day when i was removing the aero again i noticed the lip wasnt sealed air tight against the splitter. Last thing i want is it going through the gay. So i picked up some aluminum angle, fibreglass and some resin and set to work. I traced where the edge of the lip sits on the splitter and cut and bent the angle around it. Once glued down i started to lay the fibreglass. The topside is now done but needs cleaning up. Ill probably just resin the underside i think. Plan is for the air to hit the angle and dispurse up over the lip and bumper.. Sorta like a mini airdam. Anyways heres some pics: https://www.miataturbo.net/attachmen...ine=1348554194 https://www.miataturbo.net/attachmen...ine=1348554194 |
Aren't those rear splitter brackets supposed to sit the other way? So the splitter comes off if the front digs in to the ground?
Great build. :drool: |
great build sir!
|
*
|
10 Attachment(s)
Originally Posted by njn63
(Post 936747)
Aren't those rear splitter brackets supposed to sit the other way? So the splitter comes off if the front digs in to the ground?
Great build. :drool:
Originally Posted by cyotani
(Post 936753)
great build sir!
Originally Posted by rccote
(Post 936754)
Sup with that hood. I like the way you cut it.
So the other day i finished work early and made the most of the afternoon. Splitter on, canards, swap boots and put wing on. Now its ready to hit the track again next week :) Absolutely stoked with the bonnet. Really suits everything else :D https://www.miataturbo.net/attachmen...ine=1349657315 https://www.miataturbo.net/attachmen...ine=1349657315 https://www.miataturbo.net/attachmen...ine=1349657315 https://www.miataturbo.net/attachmen...ine=1349657315 https://www.miataturbo.net/attachmen...ine=1349657315 |
Any pics of the other side of the hood? It really came out looking good.
|
2 Attachment(s)
here you go :)
https://www.miataturbo.net/attachmen...ine=1349659353 i never planned on cutting that much out of the skeleton but it just sorta fell out lol. heres an engine bay pic :) https://www.miataturbo.net/attachmen...ine=1349659353 |
Well goddamn, that looks fuckin top tits.
|
5 Attachment(s)
Update:
So Thursday was another track day. Booked for a full day cos i wanted to really make the most of it. 30l extra fuel and all my tools ready :P Woke up in the morning to rain lol. Made the drive out there with it pissing down. Got to qr and the rain eased off a little and so i was hoping for it to stay away. First session out, it was wet, really slippery. Start of the second session we went 1st hot lap had a moment at turn one. Almost held it before going into the dirt lol. One lap later my mate in his supercharged k24 civic when off on the same corner but got beached so back into the pits i went. Heres a vid of turn 1 Made my way back onto the track for a few laps when disaster struck. Came in a little to hot for a corner and the rear locked up spinning me round. As i hit full lock my wheel pinch the brake line between the control arm leaving me with no brakes :( Heres the culprit :O http://farm9.staticflickr.com/8195/8...669fbcec_c.jpg How it stood for half the day lol http://farm9.staticflickr.com/8052/8...3e8303d8_c.jpg So with the car jacked up i phoned around to see if i could get another brake line out so i could get home. Luckily my mechanic had a set of braided lines in stock so he got his courier to bring them out to me with some brake fluid :D:D Few hours later he rocked up and i was able to quickly swap it over and bleed my brakes.. At this point i was gonna go home but my brakes felt ok so i decided to atleast get my money's worth. At this point it had been raining constantly for a good 2 hours so the track was soaked to say the least. However i didnt care lol. I went back out and had probably the best afternoon ive had at a track event. It was awesome to get sideways coming out of corners and by the end of the day i was getting better at controlling it :D Heres a pic to exiting turn 6 :) will be a few more coming in the next few day :D http://farm9.staticflickr.com/8332/8...83ba1115_c.jpg So all in all even though the morning was a right off i had an awesome afternoon and got to learn my car so much more :D Few things i noticed on the way home was the clutch losing pressure here and there when changing gears so i think somethings leaking. And i cracked a flare.. Oh well :P shit happens. Said cracked flare. http://farm9.staticflickr.com/8190/8...d16cd45e_c.jpg Airing it out the next day http://farm9.staticflickr.com/8333/8...059860b2_c.jpg Ill have a few pics and stuff as they come but for now heres a vid. |
5 Attachment(s)
Finally got some more pics from the last trackday from a mate :D
https://www.miataturbo.net/attachmen...ine=1350359307 https://www.miataturbo.net/attachmen...ine=1350359307 https://www.miataturbo.net/attachmen...ine=1350359307 https://www.miataturbo.net/attachmen...ine=1350359307 https://www.miataturbo.net/attachmen...ine=1350359307 |
I'd take this car behind the local middle school and stick my dick in it.
|
Wicked clean car. Very impressive :bigtu:
Any details to share about cutting the hood? Did you drill out a starting point and use a reciprocating saw to make the cuts? Or do you have a waterjet cutter in your garage :D |
Originally Posted by matthewdesigns
(Post 939708)
Wicked clean car. Very impressive :bigtu:
Any details to share about cutting the hood? Did you drill out a starting point and use a reciprocating saw to make the cuts? Or do you have a waterjet cutter in your garage :D |
3 Attachment(s)
Update:
Theres a trackday coming up that has a skidpan as well so i wanted to swap wheels and give that a go.. So i decided to build a tire rack to transport them. Unfortuately not everything went to plan but ill be making the base again better :) Atm though its stable enough to transport stuff to and from the track. So here are the pictures.. https://www.miataturbo.net/attachmen...ine=1350714968 https://www.miataturbo.net/attachmen...ine=1350714968 https://www.miataturbo.net/attachmen...ine=1350714968 So plan is to make a better base and then it should be good to go. I mounted my go pro to the roof and got footage of any movement when driving around .. Unfortunately since its wide angled it made the base look like it was bending a lot.. But in reality it doesnt :) Heres the vid :) GOPR0028 - YouTube |
6 Attachment(s)
Time for a decent update:
So last friday, two days before the track day we were in a mad rush to get the fuel system re done after another Deatschwerks pump shat itself. We decided to re do the fuel system there and then as well. Due to the flyin miata big fuel kit places the Adjustable reg just below the fuel tank at the back and is a returnless fuel setup, we think that this could be causing the pumps to over work and cause issues. So we swapped in a Walbro 255lph and moved the reg up to the engine bay and ran the lines so its a proper return system. Put it on the dyno to make sure everything was running sweet and it was :D. Put all the aero back on that after noon and got ready for the track day. Track day was awesome.. Car ran perfect the whole day and never had any issues. The new splitter worked really good giving me some good front end grip on the high speed corners. Went on the skid pan and had a ball just as much as i did on the track. Gonna keep it this way till the next track day in a few weeks time :) Heres a bunch of pics i found.. there will be more to come though. https://www.miataturbo.net/attachmen...ine=1352246158 https://www.miataturbo.net/attachmen...ine=1352246158 https://www.miataturbo.net/attachmen...ine=1352246158 https://www.miataturbo.net/attachmen...ine=1352246158 https://www.miataturbo.net/attachmen...ine=1352246158 https://www.miataturbo.net/attachmen...ine=1352246158 |
*
|
All times are GMT -4. The time now is 02:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands