Gross.
Hey so....
Coolant hoses. Both radiator and heater.
I have Skou's reroute spacer deal and a Kia neck. Figure i'll do the FM lower hose.
I'd like to do the upper in silicone as well. That's kindof a thing i'm sure i'll have to figure out myself, but i do have an Escalade hose in the meantime.
Heater hoses: Mishimoto makes them, but for NA. Do those fit NB as well? If not, what do i order?
Coolant hoses. Both radiator and heater.
I have Skou's reroute spacer deal and a Kia neck. Figure i'll do the FM lower hose.
I'd like to do the upper in silicone as well. That's kindof a thing i'm sure i'll have to figure out myself, but i do have an Escalade hose in the meantime.
Heater hoses: Mishimoto makes them, but for NA. Do those fit NB as well? If not, what do i order?
Yes, the Mishimoto NA8 hoses fit on the NB just fine, I'm using them with zero issues. I called Mishimoto directly and they claimed it wouldn't work.
949 is the only one who lists them for NB fitment, because, well, they fit.
If you want quality silicone hose to use for your upper radiator hose, Vibrant makes it. I posted links and part numbers in my "M-Tuned Coolant Reroute service parts" thread. I'm on a mission to eliminate all rubber from under my hood and Vibrant makes a lot of convenient diameters. My only warning is to make sure you get quality clamps. **** Ace hardware clamps will cut up the silicone and make you cry.
949 is the only one who lists them for NB fitment, because, well, they fit.If you want quality silicone hose to use for your upper radiator hose, Vibrant makes it. I posted links and part numbers in my "M-Tuned Coolant Reroute service parts" thread. I'm on a mission to eliminate all rubber from under my hood and Vibrant makes a lot of convenient diameters. My only warning is to make sure you get quality clamps. **** Ace hardware clamps will cut up the silicone and make you cry.
Joined: Oct 2011
Posts: 5,718
Total Cats: 830
From: Detroit (the part with no rules or laws)
I learned my lesson with this. Worm gear clamps are no good on silicone, they don't get tight enough and if they do they will shred everything. Though, i've had decent luck with ebay t bolt clamps.
Joined: Sep 2012
Posts: 4,560
Total Cats: 1,143
From: your mom's house phoenix, AZ
x1 http://www.summitracing.com/parts/ear-773420erl
x1 http://www.summitracing.com/parts/vpe-20485
https://www.miataturbo.net/engine-pe...e-parts-75584/
Joined: Oct 2011
Posts: 5,718
Total Cats: 830
From: Detroit (the part with no rules or laws)
Joined: Apr 2014
Posts: 18,643
Total Cats: 1,870
From: Beaverton, USA
Race car ****. Not pictured: 1.25" RB front bar with brace kit from Gordon.
Supermiata Wilwood Master Cylinder by concealer404, on Flickr
Supermiata Wilwood Master for scale by concealer404, on Flickr
Supermiata Wilwood Master Cylinder by concealer404, on Flickr
Supermiata Wilwood Master for scale by concealer404, on Flickr
Last edited by concealer404; Feb 18, 2015 at 10:04 AM.
Stock. I wrote a whole novel to Emilio about my potential choice (earlier low ratio booster), and he responded back with:
Emilio has spoken, so i ordered 2 minutes later.
Originally Posted by Emilio
Much better pedal with that combo.






