Pacman Miata Build thread.
#1
Pacman Miata Build thread.
So Finally had a day off work to do some thing to the car. Hot *** day to paint ****. Got the rear panel painted black with flake, and the miata badge blue flake. Got the rims painted gloss black with a ton of flake! Got the cage painted Green, and some other misc things painted. *i.e. chrome door handles and roof mounts.
Here are some shitty pictures.
Garbage wheels paint stripped!
Putting Flat Black Coat On
Cage Painted.
Doing some work on the back panel and exhaust
Putting everything back in/on
Before
After!
Here are some shitty pictures.
Garbage wheels paint stripped!
Putting Flat Black Coat On
Cage Painted.
Doing some work on the back panel and exhaust
Putting everything back in/on
Before
After!
#6
hell yea I am a ricer! pacman is coming off and the car is going white. Center caps are also being painted black, I was just trying it to see what they look like.
after all its just paint
and I have to space the hood up, when it makes my temps drop a noticable amount I don't care what it looks like.
after all its just paint
and I have to space the hood up, when it makes my temps drop a noticable amount I don't care what it looks like.
#7
If you want functionality do an extraction vent i.e the Mini cooper scoop backwards.
#12
anyways off the my jdm non functioning hood to other issues.
I have not been able to hit more than 2lbs so far, so I thought it was the exhaust manifold gasket. Tonight I took it all apart to check and it all looked fine. I take a look at my boost controller and I had a nasty leak coming through it so I just ran the vaccum line from source to wastegate. I go for a test drive and the car still only hits 2lbs..
I am going to go over all my intercooler piping tomorrow and check it out.. my only other guess would be intake manifold gasket... and I have heard those are fun to replace. Anyways, if you guys have any ideas i would appreciate it!
and
I have not been able to hit more than 2lbs so far, so I thought it was the exhaust manifold gasket. Tonight I took it all apart to check and it all looked fine. I take a look at my boost controller and I had a nasty leak coming through it so I just ran the vaccum line from source to wastegate. I go for a test drive and the car still only hits 2lbs..
I am going to go over all my intercooler piping tomorrow and check it out.. my only other guess would be intake manifold gasket... and I have heard those are fun to replace. Anyways, if you guys have any ideas i would appreciate it!
and
#13
to succesfully remove heat from the engine bay you need to have an open that creates a vacuum (some sort of reverse scoop) but you must also have a good supply of cold air to replace that other wise the vacuum inside the engine bay will end up greater than the passing air outside can create passing over the vent and then the hot air is trapped. i have heat issues as the bonnet on my car has a scoop for a top mount i/c but i have now put on a fm and the air going in that scoop traps the hot air
#18
What is wrong with this picture, where is your steering wheel? Did you flip flop the pic?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote