18psi

iTrader: (76)

VladiTune revision 1 sent

hi_im_sean

iTrader: (3)

So much excite, finally getting a good toon on this car!

Eventually we will be going for max boost hot air hair dryer(or maybe just before that point, ie 21-ish psi) glory pulls. I have never been able to find anyone who has pushed the WRX turbo on either a 1.6 or 1.8 past 10-12 PSI, let alone ALLOFIT. I'm curious to see how much this makes. We can resume the betting and speculation that was going on in this thread over a year ago when my BOV decided to vent at 12PSI on the dyno. VD numbers though as its unlikely I will put this car on a dyno again any time soon.

18psi

iTrader: (76)

there's actually a guy recently posted a plot for 260-280 and 111mph trap speed, I think that's probably the highest hp td04-13t BP on here right now (that I know of)

hi_im_sean

iTrader: (3)

BP though. probably knock 20-30 off that number for B6?

My guess has always been around 240-250whp, low 200s wtq at 21psi.

DNMakinson

iTrader: (3)

Lot more torque than 200. Can get to high boost soon. Question is if you will make any more power above 16 or so psi as choke line. In for results.

hi_im_sean

iTrader: (3)

~250tq would be sweet


Nailed it!

hi_im_sean

iTrader: (3)

long drill bit in a miti 0-2" mag base



what a retard


4* Vlad!


Plugs look decent, so thats good

18psi

iTrader: (76)

welp, it's definitely gonna make some more power

aidandj

iTrader: (5)

Make sure to pull 4* out of your current table to get back to a baseline.

18psi

iTrader: (76)

Or don't use that trash tune you had and just put the one I sent you in

hi_im_sean

iTrader: (3)

/\ that


Im going to cycle my idle cells through as wide a range of afrs as possible, adjust voltage offsets as need, reset base timing, and load Vaditune#1.

edit- probably in reverse order of what i typed

x_25

Mine was 14* off when I checked it. Ran 24* base timing on the stock ECU for nearly two years before I realized what was going on.

Check yours again in a few days. They don't always stay put.

Brand new ones are $120 from mazdaspeed motorsports.

hi_im_sean

iTrader: (3)

Timing is set, not worried about it any longer. Besides I'm pretty sure its a flag error, you can see in the pic that its quite warped.

Arca_ex

iTrader: (2)

I kind of want to borrow that gauge to set my base timing before I go in for flex fuel retune.

hi_im_sean

iTrader: (3)

We can check it on the 7/8th if you want.

Arca_ex

iTrader: (2)

Works for me.

hi_im_sean

iTrader: (3)

Finally got some decent fluid, and flushed all the auto parts store house brand dot 4 out.




After I found this



I did this.






First track day in 3ish years or something, on Sunday. So much **** has changed on the car.. The last time I was on track it was still the tired old stock motor with no boost, just an MS3 basic and a sweet $30 muffler. Was still on rubber bushings, and I don't remember what else. Going to run wastegate, 7psi, because im scared and im still on stock brakes.

18psi

iTrader: (76)

you're gonna run the car on track this sunday, untuned?

or am I about to get like 50 emails with logs and scramble to finish the tune tomorrow? lol

hi_im_sean

iTrader: (3)

No, loaded the old tune, doctored it up a bit. I probably wont do the next log for you till monday.

18psi

iTrader: (76)

gotcha. np. as long as it's safe.
you can even try doing a pull with current map and see if it's close enough.