Did you go to 7000RPPM in this?
|
Originally Posted by Braineack
(Post 866813)
nice creep.
Originally Posted by Faeflora
(Post 866853)
Did you go to 7000RPPM in this?
|
Are you going to use that preattached solenoid? I wonder who has used tgat with ms before. Maybe savigton?
|
yeah it's hooked up already to the wastegate signal lines, just not wired in (so right now its blow-through).
I need to get a pigtail for the solenoid - http://www.ultimate-racing.com/xcart...id=205&cat=113 |
Ari (99MX5) had similar issues with creep, I think. He ended up using a Forge piston type wastegate actuator
|
Originally Posted by soviet
(Post 866915)
I'm not too concerned about it while I'm purely on wastegate. If it continues when I hook up EBC then yeah, we've got a problem.
considering youre hitting 12psi at 5500 :) :party: |
Originally Posted by viperormiata
(Post 866923)
Ari (99MX5) had similar issues with creep, I think. He ended up using a Forge piston type wastegate actuator
Originally Posted by Braineack
(Post 866932)
considering youre hitting 12psi at 5500 :)
:party: |
Prob won't have creep at 30psi ;)
|
As of yesterday, had about 130 miles on the car. Got an alignment. Then I put on my DIY mbc today and raised the limiter to 7200, which is where it'll stay. Also scaled all the maps to 250kPa which is what i'll run until MS3x sexytime.
As of today, have 220 miles. the good news is that I hit 13psi by 3200-3300 rpm. the bad news is that it creeps to 17psi by redline. also needs tuning as AFRs fluctuate a bit under load and it seems I'm getting a bit of misfires. anyways, autocross tomorrow. in the wet |
In for videos of spinning horizons. Show us your wet lines, Leo!
|
it was actually dry. rain started late afternoon.
me vs my friend who autocrossed a turbo miata for over a year i'm the slow guy :) |
Nice.
Is it just me or are the slalom portions of that layout not much? They seem almost straights. |
It was a pretty lame course. Was supposed to autox today as well, but slept through it. It was a miserable day anyways.
|
I i i I AM A BELEIVER. EFR IS THA SHIZ
spools like a GT2xxx with power of GT30. Got 16psi ride tonight. Felt great. I say 300hp as it sits now! Lenny did a great build and bay looks clean. Winning. Grats. |
Are you running the 15x8 +20 TR c1 wheels for daily? What size tires are on them? I'm thinking of getting them with rs3's, and searches just bring up lots of inconsistent data about what needs to be done to fit.
|
1 Attachment(s)
Originally Posted by wittyworks
(Post 872646)
Are you running the 15x8 +20 TR c1 wheels for daily? What size tires are on them? I'm thinking of getting them with rs3's, and searches just bring up lots of inconsistent data about what needs to be done to fit.
Its a tight fit. I'm at 4.5f/4.75f pinch weld height, 700/450 springs and hammered-flat fenders. I don't seem to rub the tires anywhere on the street. For 225/45/15 tires I would go with different offset (like +25 or +30) Friend of mine took this video. Yes he listens to russian rap in his car. https://www.miataturbo.net/attachmen...ine=1335988394 |
ballin'
edit: move your arm, faggette. You are not a farmer. EDIT: Link some Russian rap for us. |
Some updates...
- Over 1k miles on built engine already. I need to put synthentic oil in... - Got an Oil Temp gauge but haven't hooked it up yet. I'll probably drill & tap my oil drain bolt because I don't like how the "adapters" fit. - Trackspeed radiator won't be here for at least a month so I got an ebay radiator. $130 shipped. Haven't installed yet. - MS3X kit + MapDaddy + 12' wiring arrives tomorrow. So next week I'll be doing my wiring tuck/rewiring the bloody car. And the most important news... - Dyno scheduled for Monday. I'll hook up the boost solenoid and turn up the boost to 18-19psi :) |
I put my oil tmep gauge on my oil feed line. I know it's not the ideal way, but it was too easy.
(i feel like mapdaddy was waste of cash, i coul dhave given you a spare MAP250 to do dual sensors) |
Originally Posted by Braineack
(Post 873274)
I put my oil tmep gauge on my oil feed line. I know it's not the ideal way, but it was too easy.
(i feel like mapdaddy was waste of cash, i coul dhave given you a spare MAP250 to do dual sensors) I can definitely spool this bitch to over 21psi |
All times are GMT -4. The time now is 12:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands