Taifighter is building a Miata
#42
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Northwest Indiana
Posts: 111
Total Cats: 0
Ok, wideband is back in and now has dimming for night time eye comfort. Car is pretty much retuned to the larger injectors.
Time to get rid of parts I won't be using anymore.
My exhaust system is sold to a member here on MT so I got that off and ready ASAP. I got slowed down by this
PO had stripped the nut. Now I admit that I made it worse trying to get it off, but come on... how do you strip a nut and not get a replacement? At least it was in the easiest spot to get to. I had a friend bring over a nut extractor (def adding a set of those to my tool box) and it was off in minutes. Exhaust system is boxed up and will be shipped on Tues
As I was taking the header off I noticed that I was missing the port on the block where most 94 owners can add an oil supply line for the turbo. It turns out that this replacement engine is a newer year and thus does not have the port. A quick call to Begi got my order corrected and the appropriate oil fittings will be sent with the kit which should go out on Monday. Note: it did not go out on Monday.
Time to get rid of parts I won't be using anymore.
My exhaust system is sold to a member here on MT so I got that off and ready ASAP. I got slowed down by this
PO had stripped the nut. Now I admit that I made it worse trying to get it off, but come on... how do you strip a nut and not get a replacement? At least it was in the easiest spot to get to. I had a friend bring over a nut extractor (def adding a set of those to my tool box) and it was off in minutes. Exhaust system is boxed up and will be shipped on Tues
As I was taking the header off I noticed that I was missing the port on the block where most 94 owners can add an oil supply line for the turbo. It turns out that this replacement engine is a newer year and thus does not have the port. A quick call to Begi got my order corrected and the appropriate oil fittings will be sent with the kit which should go out on Monday. Note: it did not go out on Monday.
Last edited by Taifighter; 03-31-2013 at 04:39 PM. Reason: 4 day delay in shipping, shipping non-complete kit. Oh well.
#44
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Northwest Indiana
Posts: 111
Total Cats: 0
Spent a little time today figuring out IC piping. Got GM IAT sensor in the core and had to adjust it to get it to fit... damn AC lines. I'm not even sure that thing works, hopefully it just needs a recharge.
Cold side to TB was a bit challenging. Seems like some people get a 99 TB to get rid of the clutter of TPS and IAC. I chose to simply go over and around them, hoping to combine a 90 with a 45 and mimic the Begi hard pipe that I see in their install manual.
Hot side looks fun, trying to eyeball and guesstimate where the piping will run once everything is in place. I used Soviets build thread as a guide to general shape and size, and ordered a few extra pieces so I will hopefully be able to knock it out and not have to place a second order.
Piping, fittings, clamps etc came to just over $300. We'll see how well I did once the kit is on.
In other news, the kit should be here Thurs but will be missing the snail, as it is being ceramic coated still. I expected about 6 weeks from order to delivery, but this is running a bit long. Oh well... the weather hasn't fully turned yet, I've been working a lot of OT and I'm playing bass in two bands right now, so there's not much time to wrench on the car anyway.
Cold side to TB was a bit challenging. Seems like some people get a 99 TB to get rid of the clutter of TPS and IAC. I chose to simply go over and around them, hoping to combine a 90 with a 45 and mimic the Begi hard pipe that I see in their install manual.
Hot side looks fun, trying to eyeball and guesstimate where the piping will run once everything is in place. I used Soviets build thread as a guide to general shape and size, and ordered a few extra pieces so I will hopefully be able to knock it out and not have to place a second order.
Piping, fittings, clamps etc came to just over $300. We'll see how well I did once the kit is on.
In other news, the kit should be here Thurs but will be missing the snail, as it is being ceramic coated still. I expected about 6 weeks from order to delivery, but this is running a bit long. Oh well... the weather hasn't fully turned yet, I've been working a lot of OT and I'm playing bass in two bands right now, so there's not much time to wrench on the car anyway.
#45
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Northwest Indiana
Posts: 111
Total Cats: 0
Here's my attempt at piping connecting to my TB
You can just barely see where I clearanced the plastic support of the fan nearest the TB to allow room for the 90 silicone elbow. I may get a set of slim fans, and if I do that I'll just get an upgraded radiator.
You can just barely see where I clearanced the plastic support of the fan nearest the TB to allow room for the 90 silicone elbow. I may get a set of slim fans, and if I do that I'll just get an upgraded radiator.
#46
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Northwest Indiana
Posts: 111
Total Cats: 0
More homemade piping
[IMG]http://i498.photobucket.com/albums/rr349/taifighter/temporary-7.jpg[/IMG
The 90 off the core has to be shortened about 2in, to allow the tire enough clearance to move without hitting the piping.
The rest is just a pipe w/SSQV flange. I think it'll reach just fine but I haven't made any permanent connections yet.
[IMG]http://i498.photobucket.com/albums/rr349/taifighter/temporary-7.jpg[/IMG
The 90 off the core has to be shortened about 2in, to allow the tire enough clearance to move without hitting the piping.
The rest is just a pipe w/SSQV flange. I think it'll reach just fine but I haven't made any permanent connections yet.
#47
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Northwest Indiana
Posts: 111
Total Cats: 0
I just found a receipt in a box from Begi informing me of a back ordered turbo, which I knew about, but the model is the 2860 not the 2560 that I had ordered.
I'm wondering if I should use the potato or send it back and wait (again) for a 2560 to be prepped and sent. 2560 v 2860 research in three... two... one...
I'm wondering if I should use the potato or send it back and wait (again) for a 2560 to be prepped and sent. 2560 v 2860 research in three... two... one...
#51
Junior Member
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Northwest Indiana
Posts: 111
Total Cats: 0
Got turo and DP on after having to cut away the lip and lift up the motor.
Making gaskets
Just waiting to do oil supply line. Why wait? Cuz trying to remove the oil pressure sending unit is ******* re-tard-ed. It's impossible to get to. 1 sandwich plate ordered to get around the problem.
Making gaskets
Just waiting to do oil supply line. Why wait? Cuz trying to remove the oil pressure sending unit is ******* re-tard-ed. It's impossible to get to. 1 sandwich plate ordered to get around the problem.