1996 1.8 Pinging when hot at full boost
#21
RIP... Problem not solved. Cylinder three burned through the piston and cylinder wall during a track day at Harris Hill Road (San Marcos, TX). Anyone want a '96 in good condition w/ all new hoses / rebuilt head / rollbar, etc. (just needs a new shortblock).?
Proper engine management is the ONLY way...
Proper engine management is the ONLY way...
#25
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,660
Total Cats: 3,011
To the OP, a replacement engine can be had in a junkyard for $400-500 if you want to go that route. The alternative is to rebuild what you've got and buy some pistons. It's not the end of the world, buddy. Just do things in order next time and you'll be fine.
#31
while i was reading the first page, i was thinking to myselft "this mother ****** is gonna **** his **** up" i click on page two and what do i read mo fo fucked his **** up!
the tittle of this needs to be changes to (NooBs! this will happen if you dont listen to smart people) or somthing of that nature and then stickied!
the tittle of this needs to be changes to (NooBs! this will happen if you dont listen to smart people) or somthing of that nature and then stickied!
#33
Elite Member
iTrader: (1)
Join Date: May 2009
Location: Jacksonville, FL
Posts: 5,155
Total Cats: 406
Its amazing how almost every post made by other members brought up the fact that he needed a wideband, and he NEVER made an response to it, just blatantly refusing to acknowledge the issue. I dont know if its from being cheap, or stubborn, or both...
Thread
Thread Starter
Forum
Replies
Last Post