need t25 parts?
#8
It's a 48/49 wheel section. CHRA's on T2 series turbos are all pretty much the same. The housings will swap over to any other T2 turbo with the same A/R specs.
That turbo with a standard T2 turbine housing is exactly what I run. On wastegate only, I get an initial spike to around 7psi, and a settle to 6psi. No matter what turbine housing you use, we've discovered around here that you've gotta port the wastegate outlet in the turbine housing to prevent or reduce boost overshoot.
That turbo with a standard T2 turbine housing is exactly what I run. On wastegate only, I get an initial spike to around 7psi, and a settle to 6psi. No matter what turbine housing you use, we've discovered around here that you've gotta port the wastegate outlet in the turbine housing to prevent or reduce boost overshoot.
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM