Hi i'm new, need a bit of info.
#1
Hi i'm new, need a bit of info.
Hi, im new here, i currently drive a Toyota Starlet Glanza V which i have tuned up to 232bhp, i am in the process of selling my car in order to get a 1.8 MX5 which i will be turbo'in.
I am planning to use a T28, T28 or T3 turbo and ill be honest, i know jack **** about these turbo's, i was wondering what the max boost pressure, spool up time and power output of these turbo's are.
I will be aiming for 220bhp to start with and then if i enjoy the car i will forge the engine and aim for more power, maybe then going with a GT series turbo. and if these cars are as fun as everyone says i cant say why this wont happen
thanks
I am planning to use a T28, T28 or T3 turbo and ill be honest, i know jack **** about these turbo's, i was wondering what the max boost pressure, spool up time and power output of these turbo's are.
I will be aiming for 220bhp to start with and then if i enjoy the car i will forge the engine and aim for more power, maybe then going with a GT series turbo. and if these cars are as fun as everyone says i cant say why this wont happen
thanks
#2
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
first, forget "bhp" because we all measure in rwhp (rear wheel hp). which I'll assume you meant since you probably haven't taken the engine out and measured its horsepower by itself.
220 rwhp on a 1.8 MX5 is easy. any one of those turbos will get you there with less than 8 or 9 psi. The T3 will get you up to 300 rwhp if you plan well.
Welcome to the forums
Matt
220 rwhp on a 1.8 MX5 is easy. any one of those turbos will get you there with less than 8 or 9 psi. The T3 will get you up to 300 rwhp if you plan well.
Welcome to the forums
Matt
#4
Either of those turbos will spool quickly, the 28 a bit faster than the T3, it is almost safe to say that you will have full boost by 3K RPM, providing you have a decent set-up.
Also, no need to forge the motor for anything less than 300rwhp providing you have a good tune, our motors are pretty stout from the factory.
The things you should consider spending money on would be wider wheels with lots of rubber and a decent suspension and definitively a roll bar.
Now, please go list your location in you profile so everyone knows where you are and maybe some locals will offer to come by for a gang bang, you never know.
Also, no need to forge the motor for anything less than 300rwhp providing you have a good tune, our motors are pretty stout from the factory.
The things you should consider spending money on would be wider wheels with lots of rubber and a decent suspension and definitively a roll bar.
Now, please go list your location in you profile so everyone knows where you are and maybe some locals will offer to come by for a gang bang, you never know.
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM