m2cupcar

iTrader: (5)

Yeah- I don't think Travis thought that one out before posting it. If he made a cam gear that could dynamically change, we'd all have one.

TravisR

iTrader: (9)

Well Matt made these plots using fixed timing just like a cam gear would. He posted the plot degrees somewhere for each run. He can do angle changes a little quicker then we can because he just has to type a number in, but as far as power changes a cam gear is a cam gear is a variable cam gear fixed guys.

I was glad Matt let me use the dyno plot. Many thanks!

y8s

iTrader: (8)

The dyno plots show the cam gear in three different positions. It doesn't move during the dyno run.

Now if he had shown those and said "have the best of all three at the same time!" it would definitely be misleading.

now if he had the exhaust cam gears in carbon fiber, I could put one on and satisfy the "not even using your product" requirement.

m2cupcar

iTrader: (5)

Ahhhh- ok. Didn't realize cam timing was fixed.

JayL

iTrader: (12)

That makes sense using it at a fixed position to show the differences. I was thinking that it's always used as a variable system. Time to play with this on my own car....an email is coming at you shortly y8s.

TURNS101

iTrader: (10)

Thanks for all the info folks.

I will update this bad boy as soon as I have more info..

TURNS101

iTrader: (10)

OK people
I got my turbo from turbonetics.
Super 60 stage 1 exhaust wheel with a .48 housing.

I will hit the Dyno next week.

I will also get whatever info I can from them from my past dyno runs with boost and all that jazz

TURNS101

iTrader: (10)

I will have the dyno plot tomorrow.
At 20psi, word is, I am in the 300's for whp and ftlbs. Thats on a Mustang Dyno.
Tomorrow I will have the plot to scan so we can see how it spools up..

m2cupcar

iTrader: (5)

Mustang? That's like 360+ rwhp on a dynojet... at least compared to the mustang/dynojet I was on.

TURNS101

iTrader: (10)

The plot is not spooled/boosted as soon as i wanted it to be. i think with the increase head flow and the Intake mod, it slowed that down a bit.

Regardless, I think these numbers are pretty bad ***.

please let me know your thoughts..

20lbs of boost.

The skinny line is the boost, with the stage 1 turbine .48 it had 313 tq and 310 rwhp.

Markp

FEAR THE SUPER 60, Bitch!!!

Mark

neogenesis2004

iTrader: (12)

You're still alive?

ON TOPIC:

What LB spring are you runing on the Tial? Do you have EBC? Tial recommends never running more than 2x the LBs boost as the spring you have in the EWG. Ideally you run the spring that is just under what you plan to run. Coupled with the EBC and you will not leak boost from the manifold pressure. With those combos you should be able to hit max boost around 3400-3500rpm at the latest. My best educated/experienced guess is that manifold pressure is opening you wg early and leaking gases.

My 1.6 with 13lb spring, running no ebc or mbc, hits max at 3500rpm currently. Same turbo.

TURNS101

iTrader: (10)

I thought about that. I have a 14lb spring in the tial wg right now.

My EBC died on dyno and I now have a MBC in its place. It was turned up to 20psi while tuning it.

I believe that the mod I made to the intake manifold is what has caused this.

The HP carries well. I believe the intake mod heped that, but hurt my spool..

I will see how this feels on the track sunday. If it sucks, I will throw on a stock IM and see what happens with the spool. I know it may make the HP dip off, but if I am feathering and clutch kicking all the time, I will take the small loss in power..

Thanks for looking everyone.
Mark P is alive!!!!

Markp

I am alive, I no longer own a Miata, so I don't cruise the Miata boards anymore. I've been working my *** off in this Ph.D. program that I am in, so I don't get much time to surf the net at all.

I recently did pick up a new ride, picture below.

psiturbo

iTrader: (1)

I thought you were the owner of the thread, kind of come out of the blue with such post.

Enjoy the overly priced mini.

Gotpsi?

iTrader: (5)

you do realize this thread has been dead for months now right?

Braineack

iTrader: (62)

and the post was not out of the blue either. But, psiturbo, yours was.

Markp

It got replaced.... LOL

shuiend

iTrader: (24)

Acceptable decade old thread bump!