just double checking.
Thread Starter
Senior Member
Joined: Dec 2005
Posts: 1,167
Total Cats: -1
just double checking.
http://shopping.lightningmotorsports...&cat=24&page=1
this is the correct flowing 190lph walboro fuel pump I need right, I see theres 2 of them in the scroll window
this is the correct flowing 190lph walboro fuel pump I need right, I see theres 2 of them in the scroll window
Reply
0
0
you want the HP model right? it's the one with part #
F2(a bunch of zeros)141
The GS model is not HP
F2(a bunch of zeros)141
The GS model is not HP
Reply
0
0
Probably either would work, but I'd be safe and get the HighPressure model with the F2 part # and not the GS standard pressure model.
Reply
0
0
haha Rican you and are should be done around the same time lol I'm ordering my Walbro this week lol. I was planning on going with the 255 HP though for bigger plans in the future.
Reply
0
0
don't buy the 255.
why?
well I'll quote myself:
why?
well I'll quote myself:
Originally Posted by Braineack Jack
For the longest time the Walbro 255 lb/h fuel pump had been the accepted pump for FI Miatas. The 255 flows more fuel at any giving pressure level than is needed. They tend to overload the OEM FPR and cause the system to run rich even in vacuum.
Regardless, there are still a few options in fuel pumps. The ideal pump is the Walbro 190 lb/h HP fuel pump. HP stands for high pressure. It is important you get a HP unit if you plan on raising the fuel pressure levels past 90psi. The HP models can supply fuel up to 130psi. The standard 190 lb/h fuel pump is maxed at 90psi and the standard 255 lb/h pump is maxed at 80psi. The 190 HP unit will not only supply four 700cc injectors with enough flow to maintain 40-50psi in the fuel rail (enough for 400hp), but out flows the 255 HP model after 100psi.
Regardless, there are still a few options in fuel pumps. The ideal pump is the Walbro 190 lb/h HP fuel pump. HP stands for high pressure. It is important you get a HP unit if you plan on raising the fuel pressure levels past 90psi. The HP models can supply fuel up to 130psi. The standard 190 lb/h fuel pump is maxed at 90psi and the standard 255 lb/h pump is maxed at 80psi. The 190 HP unit will not only supply four 700cc injectors with enough flow to maintain 40-50psi in the fuel rail (enough for 400hp), but out flows the 255 HP model after 100psi.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
stoves
Suspension, Brakes, Drivetrain
5
Apr 21, 2016 03:00 PM
