DIY Turbo Discussion greddy on a 1.8? homebrew kit?

leakdown test bad, what should I do?

Thread Tools
 
Search this Thread
 
Old 01-10-2008, 04:10 PM
  #21  
Junior Member
iTrader: (2)
 
xveganxcowboyx's Avatar
 
Join Date: Sep 2007
Location: St. Paul
Posts: 132
Total Cats: 0
Default

I had some blow by, but almost no oil consumption. I've always tuned with less than ideal piggybacks and it made it a little harder, but that was mostly due to low compression. I wouldn't think it would be a big deal, because boost is boost. Low compression is really the problem.

High oil consumption will gum things up and kill them more quickly. That worries me a bit.

Did you have the leakdown test done at a shop or did you do it yourself and what were the actual numbers? Was the engine warm or cold? Is your exhaust very blue? (it seems strange that you would burn so much oil with such good compression)
xveganxcowboyx is offline  
Old 01-11-2008, 01:05 PM
  #22  
Junior Member
Thread Starter
iTrader: (4)
 
chucker's Avatar
 
Join Date: Oct 2007
Location: santa cruz
Posts: 245
Total Cats: 1
Default

I did the leakdown test myself, warm engine. I did not record the numbers because at 150psi, air was hissing rapidly out of the dipstick tube when testing each of the cylinders. I just figured the rings were toast.

Should I redo the test and look for something else? I didn't hear any air coming from the exhaust or intake or adjacent cylinders. But this doesn't rule out bad valve guides/seals contributing to the consumption, right?

The exhaust is significant in quantity and blue in color but only above 4k rpm. Nothing visible at low rpm. Bumper gets oily soot in less than 100 miles.

Thanks again.
chucker is offline  
Old 01-11-2008, 01:16 PM
  #23  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,298
Total Cats: 477
Default

Originally Posted by xveganxcowboyx
(it seems strange that you would burn so much oil with such good compression)
The oil control rings are worn and allowing excess oil on the compression rings, keeping them sealed up with oil, despite their worn conditions.
patsmx5 is offline  
Old 01-11-2008, 04:27 PM
  #24  
Junior Member
iTrader: (2)
 
xveganxcowboyx's Avatar
 
Join Date: Sep 2007
Location: St. Paul
Posts: 132
Total Cats: 0
Default

Originally Posted by patsmx5
The oil control rings are worn and allowing excess oil on the compression rings, keeping them sealed up with oil, despite their worn conditions.


Good diagnosis.



No idea what your best option is on this one, sorry. Oil consumption that high is pretty scary though.
xveganxcowboyx is offline  
Old 01-26-2008, 10:57 PM
  #25  
Junior Member
iTrader: (1)
 
mrtonyg's Avatar
 
Join Date: Mar 2007
Location: South Florida
Posts: 483
Total Cats: -2
Default

Dude, you are looking too much into it. So long as the engine doesn't misfire or burn too much oil you will be ok. Yea, you might not make that last 5% of power over a fresh engine, but learn with the beater engine while saving up the bucks for your "good" engine.

Throw the turbo on your engine!
mrtonyg is offline  
Old 01-27-2008, 12:33 AM
  #26  
Elite Member
iTrader: (12)
 
cardriverx's Avatar
 
Join Date: Jan 2007
Location: Hermosa Beach, CA
Posts: 2,573
Total Cats: 12
Default

Originally Posted by mrtonyg
Dude, you are looking too much into it. So long as the engine doesn't misfire or burn too much oil you will be ok. Yea, you might not make that last 5% of power over a fresh engine, but learn with the beater engine while saving up the bucks for your "good" engine.

Throw the turbo on your engine!
+1. My engine burns alittle oil, and only did ok on the compression test. Its been about 5 months of up to 10 psi of boost, doing great.
cardriverx is offline  
Old 01-27-2008, 01:04 AM
  #27  
Junior Member
Thread Starter
iTrader: (4)
 
chucker's Avatar
 
Join Date: Oct 2007
Location: santa cruz
Posts: 245
Total Cats: 1
Default

Originally Posted by Arkmage
that engine restore crap in a silver can seemed to work great on my buddies old school trooper. stopped the oil consumption for nearly 40K miles when it spun a bearing (275K when it died).
I just got an $8 can of the "engine restore crap" and, just for the hell of it, I filled it up with Havoline High Mileage 10w-30 (on sale for $0.99/qt). I suspect both products are snake oil... but I'll report back with the results after 500 miles or so.
chucker is offline  
Old 01-27-2008, 01:22 AM
  #28  
Elite Member
iTrader: (16)
 
patsmx5's Avatar
 
Join Date: Aug 2007
Location: Houston, TX
Posts: 9,298
Total Cats: 477
Default

Originally Posted by chucker
I just got an $8 can of the "engine restore crap" and, just for the hell of it, I filled it up with Havoline High Mileage 10w-30 (on sale for $0.99/qt). I suspect both products are snake oil... but I'll report back with the results after 500 miles or so.
I've used engine restorer on several vehicles with good results. My 86' trooper had 140 pounds of compression on all 4 cylinders, front and rear main seals leaked, and smoked a little. I ran engine restorer for 3K miles and it stopped leaking oil, stopped smoking, and last compression test yielded 185 on all 4 cylinders. Not to bad for 8 dollars.
patsmx5 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lsc224
Miata parts for sale/trade
2
10-01-2015 09:17 AM
shooterschmidty
Engine Performance
8
09-30-2015 10:28 PM
zephyrusaurai
Meet and Greet
2
09-28-2015 10:59 PM
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM



Quick Reply: leakdown test bad, what should I do?



All times are GMT -4. The time now is 12:16 AM.