NA Turbo Parts on an NB
#42
Email Tial or meaure the vband clamp size and get one from http://store.racing-solutions.org/
What you're looking for are the pins that go in the clamp, was is a guide, the other is threaded.
What you're looking for are the pins that go in the clamp, was is a guide, the other is threaded.
#47
Email Tial or meaure the vband clamp size and get one from http://store.racing-solutions.org/
What you're looking for are the pins that go in the clamp, was is a guide, the other is threaded.
What you're looking for are the pins that go in the clamp, was is a guide, the other is threaded.
#54
Well it looks like the Manifold won't fit with my GT2860RS. The exhaust side of the turbo is 1/2" to 1" away from my Brake Booster. With normall Engine movment it would hit the brake booster and it's so close i'm sure it would melt it.
Not good not good at all.. i pretty much based my whole kit around this Mani only to find out it's a no go.
Hopefully BEGI can come through with a Cast Mani..
I don't have any pics and i'm to pissed right now to get it all back on to take any.
I don't know if this is an NA to NB issue or if changing the Turbo is the problem.. Maybe a little of both.
Not good not good at all.. i pretty much based my whole kit around this Mani only to find out it's a no go.
Hopefully BEGI can come through with a Cast Mani..
I don't have any pics and i'm to pissed right now to get it all back on to take any.
I don't know if this is an NA to NB issue or if changing the Turbo is the problem.. Maybe a little of both.
#55
Elite Member
iTrader: (11)
Join Date: Jun 2007
Location: Overland Park, Kansas
Posts: 5,360
Total Cats: 43
This is the best picture I can find right now to represent what I'm trying to show you, but look for a turbo with a center inlet on the turbine housing, instead of the offset like most turbos..
That might get you far enough away from the booster? maybe?
That might get you far enough away from the booster? maybe?
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM