|
Yeah those numbers I basically understand but calculating is something else lol. Not boosting for a while though. Gotta get used to ms.
|
Both my roomates are from Oahu. I've learned a thing or two.
|
10 Attachment(s)
Heres what the inside of a fake Greddy BOV looks like :D
https://www.miataturbo.net/attachmen...ine=1426620984 https://www.miataturbo.net/attachmen...ine=1426620984 https://www.miataturbo.net/attachmen...ine=1426620984 https://www.miataturbo.net/attachmen...ine=1426620984 https://www.miataturbo.net/attachmen...ine=1426620984 It's hard to see but on the diaphragm thing, there is a little half inch white line that runs across the section that "folds". This is a area where its very thin and the light is shining through. I'm not sure how this will affect the function. I could always replace it. https://www.miataturbo.net/attachmen...ine=1426620984 I washed the parts then put a little bit of caliper grease on the seals and shaft https://www.miataturbo.net/attachmen...ine=1426620984 I've started taking apart the turbo for cleaning and at this point and am thinking about just going ahead and rebuilding it. I've realized that when I clock the turbo I'll have to figure out how to connect the waste gate actuator to the flapper. https://lh6.googleusercontent.com/-6...o/IMG_0101.JPG I don't get it, some bolts are there, some not.. https://www.miataturbo.net/attachmen...ine=1426620984 https://www.miataturbo.net/attachmen...ine=1426620984 https://www.miataturbo.net/attachmen...ine=1426620984 |
Fake Greddy BOV The adjustment screw on top is just to prevent it from opening 'too much' or you can tighten it down to where the valve doesn't open at all. Be sure to use a nut on the adjustment or it'll move freely and not attempt to seal at all. Also, It's a piece of junk. If it is open too much you may have idle issues. |
Originally Posted by Girz0r
(Post 1215794)
I have the same bov on my desk. Makes a great paperweight.
The adjustment screw on top is just to prevent it from opening 'too much' or you can tighten it down to where the valve doesn't open at all. Be sure to use a nut on the adjustment or it'll move freely and not attempt to seal at all. Also, It's a piece of junk. If it is open too much you may have idle issues. I thought maybe the adjustment would be to adjust the psi threshold to release the pressure or sumthin |
Originally Posted by Hinano
(Post 1215873)
Did your bov not function?
I thought maybe the adjustment would be to adjust the psi threshold to release the pressure or sumthin The adjustment literally goes up or down and limits the travel on the black shaft you greased up. *edit The fix was to purchase a legit greddy FV BOV. At the time I was able to grab a limited edition red/chrome FV valve. Seals at idle/off boost. Goes Chooo |
Err... Okay well I hope it holds but if not I'll pick up a 1gen dsm one I guess. And I'll have a new ornament lol. Might be fun to try to mod the fake one to work.
|
1 Attachment(s)
youre the weird scooter guy from s10forum! i just put it together.
https://www.miataturbo.net/attachmen...ine=1427126746 |
5 Attachment(s)
Just for fun, heres another great deal I scooped up from another neighbor. 02 TDI Beetle 5speed with 9x,000 miles for $600!! NO JOKE 600!!! They were my Japanese neighbor friends. The husband worked at the Subaru observatory :D
https://www.miataturbo.net/attachmen...ine=1427258463 https://www.miataturbo.net/attachmen...ine=1427258463 https://www.miataturbo.net/attachmen...ine=1427258463 Thats Butterz https://www.miataturbo.net/attachmen...ine=1427258463 https://www.miataturbo.net/attachmen...ine=1427258463 |
I know it wanst you, your the guy with the chambourd bottle lol. I just didn't want to post a pic of you.
Funny you like the s10 crowd, they are worse than miata.net in my opinion. I remember when you got that beetle to, we all thought you were gay. |
Originally Posted by hi_im_sean
(Post 1218458)
I know it wanst you, your the guy with the chambourd bottle lol. I just didn't want to post a pic of you.
Funny you like the s10 crowd, they are worse than miata.net in my opinion. I remember when you got that beetle to, we all thought you were gay. |
3 Attachment(s)
Originally Posted by hi_im_sean
(Post 1218458)
I know it wanst you, your the guy with the chambourd bottle lol. I just didn't want to post a pic of you.
Funny you like the s10 crowd, they are worse than miata.net in my opinion. I remember when you got that beetle to, we all thought you were gay. I sold that beetle for over 5G's btw! :D You mean this?? :rofl: https://www.miataturbo.net/attachmen...ine=1427307696 https://www.miataturbo.net/attachmen...ine=1427307696 https://www.miataturbo.net/attachmen...ine=1427307696 https://lh6.googleusercontent.com/zg...=w1032-h771-no I'm all about having a ridiculous time :rofl::rofl: |
4 Attachment(s)
btw I sold my Infiniti G20 then I paid my bills and with my left overs I picked up this..
https://www.miataturbo.net/attachmen...ine=1427307998 01 Prelude SH, 5 speed, 89k miles, $6,000! I flew to Oahu to pick it up and shipped it to my island before I sold that and picked up my 01 SE. :D https://www.miataturbo.net/attachmen...ine=1427307998 Took a road trip around Oahu. https://www.miataturbo.net/attachmen...ine=1427307998 https://www.miataturbo.net/attachmen...ine=1427307998 |
i forgot about the mailbox sub, it hurt me then and it hurts me again now.
|
Originally Posted by hi_im_sean
(Post 1218482)
i forgot about the mailbox sub, it hurt me then and it hurts me again now.
But I never knew those were drinks of the gay. :pitlab: Not that I care cause it tastes good. |
1 Attachment(s)
Originally Posted by Hinano
(Post 1218905)
Oh you're talking about that alcoholic beverage! Yeah that stuff is yummy, it's strawberry brewed beer. I recommend trying it. :bigtu:
But I never knew those were drinks of the gay. :pitlab: Not that I care cause it tastes good. https://www.miataturbo.net/attachmen...ine=1427404460 not just gay, dangerous reckless illegal gayness also, at the moment, you have one less neg props than post count. which i think is being done intentionally. lmao |
|
| All times are GMT -4. The time now is 07:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands