Banjo fittings - where to get?
#1
Banjo fittings - where to get?
Where can I get these low profile banjo fittings, aside from ATP? (They are ~$20 each)
I need a fitting in a tight space. My ETD manifold has the flange almost 45° from vertical, so my current fitting will hit the mani if I don't clock the CHRA from vertical. (see photo of my setup in bottom).
Ideally I want a low profile fitting which goes down, then turns 90° towards the front of the car, end ends in a barb.
I'm thinking of using the first one below, then buying an NPT to plumbing style compression fitting: I will then flare the end of a copper pipe to mate to it, which goes down, then bends 90° towards the front of a car, then I push the 3/8" coolant hose onto it.
Banjo to NPT:
http://www.atpturbo.com/Merchant2/me..._Code=ATP-FTG1
or this:
Banjo to barb:
http://www.atpturbo.com/Merchant2/me..._Code=ATP-FTG1
Below is my setup. Note left hand coolant fitting, which turns up. There's not enough room to point it down, which is what I want. Note CHRA is clocked clockwise a bit to make the fitting clear the mani.
I need a fitting in a tight space. My ETD manifold has the flange almost 45° from vertical, so my current fitting will hit the mani if I don't clock the CHRA from vertical. (see photo of my setup in bottom).
Ideally I want a low profile fitting which goes down, then turns 90° towards the front of the car, end ends in a barb.
I'm thinking of using the first one below, then buying an NPT to plumbing style compression fitting: I will then flare the end of a copper pipe to mate to it, which goes down, then bends 90° towards the front of a car, then I push the 3/8" coolant hose onto it.
Banjo to NPT:
http://www.atpturbo.com/Merchant2/me..._Code=ATP-FTG1
or this:
Banjo to barb:
http://www.atpturbo.com/Merchant2/me..._Code=ATP-FTG1
Below is my setup. Note left hand coolant fitting, which turns up. There's not enough room to point it down, which is what I want. Note CHRA is clocked clockwise a bit to make the fitting clear the mani.
#5
Did a search on Summit for "NPT Banjo" and got these, none of which is correct:
http://store.summitracing.com/egnsea...nresults=false
http://store.summitracing.com/egnsea...nresults=false
Thread
Thread Starter
Forum
Replies
Last Post
bigmackloud
Miata parts for sale/trade
19
01-08-2021 11:24 AM
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM