quick one
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: San Diego, CA
Posts: 70
Total Cats: 0
quick one
ok really easy. . . . .
T3 turbo, BEGI mani & DP, EMB, 305'S, Oil lines. Is this enough for a DIY/greddy replica or will i still need a afpr. Sorry searched for the answere but it all came back mixed.
T3 turbo, BEGI mani & DP, EMB, 305'S, Oil lines. Is this enough for a DIY/greddy replica or will i still need a afpr. Sorry searched for the answere but it all came back mixed.
#4
Elite Member
iTrader: (5)
Join Date: Jul 2006
Location: Central California
Posts: 2,555
Total Cats: 4
I dont know much about EMB, other than its the most basic of the Greddy Emanage Series. We have an e-manage section on the forum and I think its in your best interest to spend some time there and get a good understanding of what you have to work with as well as what others have done or are doing.
#5
NO, you don't HAVE to run 305's... I'm not sure what the upper limit of EMB is on injectors, but I know guys run up to 460's... if you search and find dudes running 550's, that would be your best bet for overhead and future growth. There is an Emanage forum, I'd start there.
I'd also plumb in your BOV now just in case you get a boost spike somewhere down the line you don't hurt your turbo.
I'd also plumb in your BOV now just in case you get a boost spike somewhere down the line you don't hurt your turbo.
Thread
Thread Starter
Forum
Replies
Last Post
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM