settings only stick if I have my laptop
#1
settings only stick if I have my laptop
Right now I have to have my laptop connected in order to get the car to start. Otherwise it will just crank but never start.
Does anyone also have a airflow map for a NB? Or an Idea of what the voltage looks like as it sweeps through the revs. And what does your look like in Boost?
Thanks
Does anyone also have a airflow map for a NB? Or an Idea of what the voltage looks like as it sweeps through the revs. And what does your look like in Boost?
Thanks
#5
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,027
Total Cats: 6,592
I know this is pretty basic, but are you doing an "Export Data" from the PC to the EMU after you load / edit the setups?
The EMU will hold whatever changes you make in RAM as you perform them, but unless you do an Export to write them into EEPROM, it will forget everything after you power it off. This is why Autotune only works when you have a laptop connected. Technically, the autotune will always run, but without a PC you won't be able to save the changes to EEPROM before turning the car off.
The EMU will hold whatever changes you make in RAM as you perform them, but unless you do an Export to write them into EEPROM, it will forget everything after you power it off. This is why Autotune only works when you have a laptop connected. Technically, the autotune will always run, but without a PC you won't be able to save the changes to EEPROM before turning the car off.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM