Installing 2002 Coils on 1990 wiring
#4
I am doing the same thing. Please Please post details of how you do the: use the MS1 tacho circuit to drive the tacho in the cluster.
Which color wires would be what at the coils?
Where do I pick up the tach wiring for the dash tach to splice it into the megasquirt?
I am doing the same swap and having been searching to figure this out with no luck. Please help
Which color wires would be what at the coils?
Where do I pick up the tach wiring for the dash tach to splice it into the megasquirt?
I am doing the same swap and having been searching to figure this out with no luck. Please help
#9
So I run a wire from the yellow/blue and black/white ignitor harness on the 90 miata and I splice them and run them to the tach output on the MS Diypnp.
Then I run the Brown and Yellow to the coil 4&1
and I run brown the 3 & 2
Then reset the dwell for the 04 coils and that should do it?
What is the right dwell for 04 coils?
Then I run the Brown and Yellow to the coil 4&1
and I run brown the 3 & 2
Then reset the dwell for the 04 coils and that should do it?
What is the right dwell for 04 coils?
#12
I am running wire into the cabin anyway for the VVT controler but that is a good idea. besides I have not idea what the purge solinoid is or what wire on the harness corispondes to it.
But I was hoping to use stock wires to get the coils signal to the 04 coils. I figured that would be easy enough since I am still running waste style coils like factory. So just run:
Then I run the Brown and Yellow to the coil 4&1
and I run brown the 3 & 2
What do you think of that idea absRTP?
I also wanted to thank you for posting this stuff. It really has helped me get my head around whats involved and answered questions I could not figure out. THANKS!
What is the right dwell for 04 coils?
But I was hoping to use stock wires to get the coils signal to the 04 coils. I figured that would be easy enough since I am still running waste style coils like factory. So just run:
Then I run the Brown and Yellow to the coil 4&1
and I run brown the 3 & 2
What do you think of that idea absRTP?
I also wanted to thank you for posting this stuff. It really has helped me get my head around whats involved and answered questions I could not figure out. THANKS!
What is the right dwell for 04 coils?
Thread
Thread Starter
Forum
Replies
Last Post