MS3X A/C Control issues
#1
Senior Member
Thread Starter
Join Date: Jan 2011
Location: sacramento ,ca
Posts: 563
Total Cats: 160
MS3X A/C Control issues
I'm having issues getting the a/c settings to work as my brain understands them to. The compressor will continue to cycle on and off very quickly even though I have the "delay since last on" set to 20 seconds. I have the "A/C on" button wired it so the 12v signal passes though both pressure/cycling switches before going into the DATA LOG input. Will wiring it this way "reset" the internal clock due to it working the same as the A/C switch being turned off and on?
#3
Senior Member
Thread Starter
Join Date: Jan 2011
Location: sacramento ,ca
Posts: 563
Total Cats: 160
Found my problem, I couldn't read my own wiring diagram and had the pressure/cycling switches on the wrong wire. Here is how it was actually wired. I fixed the wiring to match the one in the original post. AC now works as it should.
Thread
Thread Starter
Forum
Replies
Last Post
Saldua
MEGAsquirt
16
06-26-2023 07:55 PM