Originally Posted by nazarite
(Post 1533404)
Sorry for the thread resurrection, I did not see the MSPNP Gen 2 mentioned, will that fit this bracket? Thanks!
|
n/a
|
Originally Posted by ThePass
(Post 1533406)
What are the LxWxH dimensions of your case?
https://www.diyautotune.com/product/...-manual-trans/ |
On my -99 NB the ecu is mounted to passanger footwell, I think it is eu thing? Would the 90-93 work for me?
|
Originally Posted by nazarite
(Post 1533410)
It's this guy, don't have it on me so I'll have to wait until I get the car back.
https://www.diyautotune.com/product/...-manual-trans/ |
Originally Posted by topsu
(Post 1533466)
On my -99 NB the ecu is mounted to passanger footwell, I think it is eu thing? Would the 90-93 work for me?
|
Got an inquiry asking if the 99-05 ECU Bracket allows access to the options port on the MS3 Pro. Happened to have an MS3 Pro sitting here today.
Answer: yes! You have full access to every port on the ECU. https://photos.smugmug.com/Singular/...IMG_9448-L.jpg https://photos.smugmug.com/Singular/...IMG_9449-L.jpg |
Do y'all make a RHD variant of the ECU brackets? I purchased one for a 90-93 and it does work but the top hole doesn't like up at all.
With the kick plate installed over it the ECU is held firm. Just wish I had an option to reduce vibration. |
Originally Posted by L337TurboZ
(Post 1621961)
Do y'all make a RHD variant of the ECU brackets? I purchased one for a 90-93 and it does work but the top hole doesn't like up at all.
With the kick plate installed over it the ECU is held firm. Just wish I had an option to reduce vibration. |
Originally Posted by ThePass
(Post 1621990)
Unfortunately we have no RHD cars here in the US to take measurements and see what would need to be tweaked. So, the brackets are intended for LHD but *might* work on RHD cars to some extent but we can't confirm. We wouldn't do a RHD specific version - too little demand - but I'd be happy to take a look at whether some additions or tweaks could be made to make the one version work better on RHD cars in addition to LHD. But for that I'd need someone with a RHD car to send us measurements etc. to even be able to take a look at what's possible.
|
Originally Posted by L337TurboZ
(Post 1621993)
I can do that for you. I'm in South Carolina but I have a RHD car. I'll get pictures and measurements for you. The bracket worked at the bottom mounting holes but the top hole didn't work. It wouldn't take much to make a modification to what you're producing to make it compatible with both.
FAQ / Contact Us | Singular Motorsports |
Originally Posted by ThePass
(Post 1621997)
Shoot me an email with some pics and measurements, happy to take a look.
FAQ / Contact Us | Singular Motorsports https://cimg1.ibsrv.net/gimg/www.mia...7dc6b7e988.jpg |
All times are GMT -4. The time now is 09:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands