K-swap How-to: A by-the-book K24A2 NB2 swap build thread
Half street, half track K swap here.
1) I don't think it's bad but everyone has different limits for NVH. I had stock non-MS mounts before the swap.
2) Haven't had any issues with underhood temps. Currently using the race header with ceramic coating. I do have the closest harness to the exhaust wrapped though as well.
3) I have the Koyo Hyper V and stock fan and do fine. I'd get rid of the garbage Mishimoto fans.
4) I use Ktuner. Cheaper but uglier than Kpro. Would recommend against just a reflash. Too many variables.
5) Keep the 3.9. These motors rev a little more than the stock BP.
1) I don't think it's bad but everyone has different limits for NVH. I had stock non-MS mounts before the swap.
2) Haven't had any issues with underhood temps. Currently using the race header with ceramic coating. I do have the closest harness to the exhaust wrapped though as well.
3) I have the Koyo Hyper V and stock fan and do fine. I'd get rid of the garbage Mishimoto fans.
4) I use Ktuner. Cheaper but uglier than Kpro. Would recommend against just a reflash. Too many variables.
5) Keep the 3.9. These motors rev a little more than the stock BP.
Reply
0
0
Newb
Joined: Jul 2018
Posts: 17
Total Cats: 0
Thanks Zeller! How long have you had your conversion and how many miles do you have on her?
Good point on the mishimoto fans....they're coming off. I think I'll unshroud the Koyo and mount the new Spal fans like oem. It seems like with the shroud in place, it limits airflow at moderate to high speeds...just a hunch on my part. Yes, the Koyo is sealed around the edges to keep airflow directed thru the core.
Only a couple of hundred more for the Kpro vs reflash, chump change in the long run.
[edit] Holy Smokes, how did I miss your build thread? Just found it, my questions ^^ are answered. Subed for updates
Good point on the mishimoto fans....they're coming off. I think I'll unshroud the Koyo and mount the new Spal fans like oem. It seems like with the shroud in place, it limits airflow at moderate to high speeds...just a hunch on my part. Yes, the Koyo is sealed around the edges to keep airflow directed thru the core.
Only a couple of hundred more for the Kpro vs reflash, chump change in the long run.
[edit] Holy Smokes, how did I miss your build thread? Just found it, my questions ^^ are answered. Subed for updates
Last edited by Pconlon; Dec 11, 2018 at 12:08 PM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
nigelt
Build Threads
178
Feb 9, 2022 01:57 PM
Goingnowherefast
Race Prep
38
Aug 21, 2017 01:55 AM
