lifter ticking after driving... BP4W.
#29
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
He drives an NA6 with a Greddy, I assume the LS couldn't handle the transference of pent up aggression that would cause
(Actually I have mad respect for Mr Hornet, I'm obviously just jelly)
But seriously, a valve cover gasket and a set of feeler gauges should be on your shopping list. Its a fairly easy thing to diagnose in an hour, though correction will take a bit longer.
(Actually I have mad respect for Mr Hornet, I'm obviously just jelly)
But seriously, a valve cover gasket and a set of feeler gauges should be on your shopping list. Its a fairly easy thing to diagnose in an hour, though correction will take a bit longer.
#34
I wondered how they managed that on a single cam engine. Now I've got to go read about it.
I use 15w40 in my 350 TPI IROC w/ the large truck filter. Doesn't get driven. Long-term project at this point. Stupid T-Tops. Should have gotten a hardtop car.... Been tempted to sell it, but what 85z28 said.
Or something like that....
I use 15w40 in my 350 TPI IROC w/ the large truck filter. Doesn't get driven. Long-term project at this point. Stupid T-Tops. Should have gotten a hardtop car.... Been tempted to sell it, but what 85z28 said.
Originally Posted by 85z28
I wish I could quit you
#37
Elite Member
iTrader: (37)
Join Date: Apr 2010
Location: Very NorCal
Posts: 10,441
Total Cats: 1,899
BARMY: From what I understand, the new valve train will 'seat' a little, which is exactly why you need to check those clearances again. This is something you can do yourself with simple tools and without getting the machine shop involved. Id absolutly do it for piece of mind, at least to eliminate variables. It might have been at the top or bottom of the clearance spec and now it's slightly out. It's just kinda the nature of the beast with solid lifters.
Go look up the process for adjusting rocker arms on old school American iron V8s, and not the ones with the fancy new adjustable roller rockers. Itll make you glad we only have to deal with shims.
Go look up the process for adjusting rocker arms on old school American iron V8s, and not the ones with the fancy new adjustable roller rockers. Itll make you glad we only have to deal with shims.
#38
Your car very much as mine did a few weeks ago. Same color, ride height etc. Then had to sell the hardtop to contribute to the motor rebuild. Sold the black 6ULs as they were only 7.5s and I needed 8s to clear the bigger brakes. Added a cheaper rear spoiler to replace the OEM one sold years ago.
Anyway, no pics of the head work. It was simply a rebuilt cleaned up BP4W head with one replaced valve, one replaced cam and new Eibach double valve springs. The original head was discovered not to be capable of being made true just with a skim as the whole thing had been so overheated that the bearing journals were also out of true.
Please understand I'm a mere car salesman translating what the spannermen have told me by the way, so accept that some of my terminology may be wrong.
I badly phrased my comment about the valve noise. What I meant was that it's all valve noise, but it doesn't seem as if all the valves are noisy.
Anyway, no pics of the head work. It was simply a rebuilt cleaned up BP4W head with one replaced valve, one replaced cam and new Eibach double valve springs. The original head was discovered not to be capable of being made true just with a skim as the whole thing had been so overheated that the bearing journals were also out of true.
Please understand I'm a mere car salesman translating what the spannermen have told me by the way, so accept that some of my terminology may be wrong.
I badly phrased my comment about the valve noise. What I meant was that it's all valve noise, but it doesn't seem as if all the valves are noisy.
Thread
Thread Starter
Forum
Replies
Last Post
Der_Idiot
Engine Performance
14
09-16-2015 09:30 PM
SuperSneakySecretSquirrel
Meet and Greet
5
09-06-2015 08:30 PM
itsMikey
Insert BS here
0
09-05-2015 02:56 PM
Der_Idiot
Engine Performance
12
09-03-2015 03:31 PM