Why no more power???
#23
Mine aren't that floppy either so I tried the no exhaust ride instead. Results are that it was so loud that it felt it had a lot more power then it actually did so I'm not sure if the exhaust was clogged or not. I will continue to investigate until I decide to buy the wideband and boost gauge (and maybe MS2) but in the meantime here is a little video of the car when it was working great:
Thanks for your help!
Thanks for your help!
#27
Alright guys, the car has 180 000km and has perfect compression. It has a Powercard - yes I know it is far from the best management - to control the injection. The ignition is still OEM and if detonation is detected there is a knock sensor that will retard ignition timing. For the boost gauge, well this is no turbo, there is no wastegate. The only way to change boost would be to change the pulleys and I am pretty sure that it won't happent even if i don't have a boost gauge. The wideband would be nice but with the narrowband I am supposed to be at 14.7 on the whole powerband and that's it. I know it is far from the perfect setup but it at around 7psi this is not an agressive one.
#30
Moderator
iTrader: (12)
Join Date: Nov 2008
Location: Tampa, Florida
Posts: 20,664
Total Cats: 3,013
Did you remove and inspect the catalytic converter for broken ceramic blocks or not? If you don't see any that look broken then the pieces are all in your muffler now or stuck at the elbow in the exhaust pipe. That's why the rattle stopped.
#31
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
Alright guys, the car has 180 000km and has perfect compression. It has a Powercard - yes I know it is far from the best management - to control the injection. The ignition is still OEM and if detonation is detected there is a knock sensor that will retard ignition timing. For the boost gauge, well this is no turbo, there is no wastegate. The only way to change boost would be to change the pulleys and I am pretty sure that it won't happent even if i don't have a boost gauge. The wideband would be nice but with the narrowband I am supposed to be at 14.7 on the whole powerband and that's it. I know it is far from the perfect setup but it at around 7psi this is not an agressive one.
#32
You are not supposed to be at 14.7AFR on the whole powerband. At max boost you are supposed to be at 11.5-12.0AFR. You need to buy a wideband 02 sensor and gauge now. Then you need to see what exactly you are running for AFR's. If you run 14.7AFR in boost you will cause your motor to melt.
#34
I will probably buy the wideband soon if all else fails.
Thanks for the help!
#35
mkturbo.com
iTrader: (24)
Join Date: May 2006
Location: Charleston SC
Posts: 15,177
Total Cats: 1,681
NO!!!! You need to order the wideband TODAY. It is not safe to drive a car with forced induction without being able to monitor the AFR's correctly. If you can not afford a wideband currently then stop driving the car until you can. Because if you can not afford a wideband you most certainly will not be able to afford a new engine when your current motor blows.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM