All Popular Engine Weights - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


General Miata Chat A place to talk about anything Miata

Reply
 
 
 
LinkBack Thread Tools
Old 09-02-2013, 12:12 AM   #1
Senior Member
Thread Starter
 
Join Date: Oct 2011
Location: The Race Track & St Pete FL
Posts: 587
Total Cats: 47
Default All Popular Engine Weights

I am posting this info up to help others know the weight of popular engine swaps. If you found another engines, then post it up with a link to where you found it and I will add it to the list. Here is what I got so far...


PS......Power Steering
AC.....Air Conditioning
A.......Alternator
H.......Header
M.......Cast Iron Manifold
T.......Turbo
IM......Intake Manifold
TM.....Transmission

2009 F1............95KG/209lb..............A/H/IM
F20C................209KG/460lb............PS/A/AC/H/IM/TM
LS1..................284KG/626lb............PS/A/AC/H/IM/TM
KA24DE.............168KG/371lb............PS/A/AC/M/IM
B6ZE................184KG/407lb.............PS/A/AC/M/IM/TM
SR20DET...........204KG/450lb.............PS/A/AC/H/IM/TM
H1V8 400hp.......91KG/200lb..............A/H/IM
VQ35DE............150KG/330lb.............M/IM
13b-REW............242KG/534lb............PS/AC/A/M/IM/TM
LT1...................241KG/531lb............M/IM


(2009 Formula 1)....http://www.f1technical.net/articles/4
(LS1 and F20c)......STICKY - LS1 Vs F20C WEIGHT DIFFERENCE
(KA24DE)......http://forums.nicoclub.com/240sx-ka2...t-t299880.html
(H1V8)......SPECIFICATIONS PAGE ...
(B6ZE/13b)....[NA] BP-ZE weight? - MX-5 Miata Forum
(Chevy LT1)....LT1 Engine Weight - CamaroZ28.Com Message Board

Last edited by 1993ka24det; 09-02-2013 at 12:26 PM.
1993ka24det is offline   Reply With Quote
Old 09-02-2013, 10:40 AM   #2
Tour de Franzia
iTrader: (6)
 
hustler's Avatar
 
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,114
Total Cats: 351
Default

The problem with my H1 is the stacks going through the hood. That's why I switched to the Lamborgina V12.
hustler is offline   Reply With Quote
Old 09-02-2013, 11:03 AM   #3
:(
iTrader: (7)
 
Join Date: Jul 2006
Location: nowhere
Posts: 8,281
Total Cats: 2
Default

an lt1 wieghs 450 with ps, A, IM, but without a transmission or oill
magnamx-5 is offline   Reply With Quote
Old 09-02-2013, 11:05 AM   #4
Senior Member
iTrader: (6)
 
Join Date: Aug 2009
Location: Charlotte, NC
Posts: 924
Total Cats: 16
Default

has anyone actually done a h1v8??

Also, any chance we could get the bp engines in there as well as a reference point? Or do they basically weigh the same as the b6?
Gryff is offline   Reply With Quote
Old 09-02-2013, 11:06 AM   #5
:(
iTrader: (7)
 
Join Date: Jul 2006
Location: nowhere
Posts: 8,281
Total Cats: 2
Default

b6 and bp are about 400lbs with accesories.
magnamx-5 is offline   Reply With Quote
Old 09-02-2013, 12:05 PM   #6
Senior Member
Thread Starter
 
Join Date: Oct 2011
Location: The Race Track & St Pete FL
Posts: 587
Total Cats: 47
Default

Quote:
Originally Posted by hustler View Post
The problem with my H1 is the stacks going through the hood. That's why I switched to the Lamborgina V12.
LOL, way to go. Do you want me to put the Lambo V12's up there? If you need some parts, then here take a look at the prices for parts http://www.usedlamborghiniparts.com/...tsListings.htm

Quote:
Originally Posted by magnamx-5 View Post
an lt1 wieghs 450 with ps, A, IM, but without a transmission or oill
It's up there now, I looked through a few forums and got an average then went with the one with more info.

Quote:
Originally Posted by Gryff View Post
has anyone actually done a h1v8??

Also, any chance we could get the bp engines in there as well as a reference point? Or do they basically weigh the same as the b6?
The H1V8 is so over priced at around $20k and plus a trani to make fit. Now there is a twin turbo option for the little V8 that will make 1000 hp/500 ft/lbs from Hole Shot Racing.

Quote:
Originally Posted by magnamx-5 View Post
b6 and bp are about 400lbs with accesories.
Yes, they were really close to the same weight so thats why I haven't put it up there

Last edited by 1993ka24det; 09-02-2013 at 12:35 PM.
1993ka24det is offline   Reply With Quote
Old 09-02-2013, 12:09 PM   #7
Senior Member
iTrader: (6)
 
Join Date: Aug 2009
Location: Charlotte, NC
Posts: 924
Total Cats: 16
Default

Quote:
Originally Posted by 1993ka24det View Post
The H1V8 is so over priced at around $20k and plus a trani to make fit. Now there is a twin turbo option for the little V8 that will make 1000 hp/500 ft/lbs from Hole Shot Racing.
Yeah, that is exactly why I was asking if it had actually been done.
Such an awesome, but pricey little engine.
Gryff is offline   Reply With Quote
Old 09-02-2013, 12:27 PM   #8
Tour de Franzia
iTrader: (6)
 
hustler's Avatar
 
Join Date: Jun 2006
Location: Republic of Dallas
Posts: 29,114
Total Cats: 351
Default

Quote:
Originally Posted by 1993ka24det View Post
LOL way to go do you want me to put the Lambo V12's up there? If you need some part then here take a look at the prices for parts USED SALVAGED LAMBORGHINI PARTS - DIABLO,COUNTACH,MURCIELAGO,REPLICA,AFTERMARKET and LAMBORGHINI JALPA.



It's up there now I looked through a few forms and got an average and found one with more info.



The H1V8 is so over priced at around $20k and plus a trani to make fit. Now there is a twin turbo option for the little V8 that will make 1000 hp/500 ft/lbs from Hole Shot Racing.


Yes, they were really close to the same weight so thats why I haven't put it up there
Please tell us that English is not your first language.
hustler is offline   Reply With Quote
Old 09-02-2013, 12:30 PM   #9
Senior Member
Thread Starter
 
Join Date: Oct 2011
Location: The Race Track & St Pete FL
Posts: 587
Total Cats: 47
Default

I also put up a Formula 1 engine just for fun. They said, "each manufacturer easily reaches this regulated minimum weight". This I'm guessing is with the KERS unit attached.
1993ka24det is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Project Gemini - Turbo Civic on the Cheap Full_Tilt_Boogie Build Threads 57 07-19-2017 05:11 PM
WTB MP62 (Hotside) (NB2) Rick02R WTB 3 01-03-2016 08:18 PM
Changing from 460cc to flow force 610cc in diypnp 90 Turbo MEGAsquirt 19 10-19-2015 04:23 PM
Expected intake temps on the track? tazswing Race Prep 20 10-03-2015 12:04 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 05:55 PM.